Test Com Ports Xscale Wince 4.2
From: Tweeeek (Tariq.Mahmood_at_nospam.com)
Date: 11/19/04
- Next message: mindengxue: "about DVDROM"
- Previous message: Chris Muench: "Re: Trying to port a PCMCIA driver from a BSP4.1 to CE5"
- Next in thread: Michael Schaffner, P.E.: "Re: Test Com Ports Xscale Wince 4.2"
- Reply: Michael Schaffner, P.E.: "Re: Test Com Ports Xscale Wince 4.2"
- Messages sorted by: [ date ] [ thread ]
Date: Fri, 19 Nov 2004 09:12:08 -0000
Hi
We have been using the SA1110 and used the various the various com ports
(irda, usb standard tx, rx ports functionality). We have now moved to the
Xscale processor and have managed to port across display, touch, keyboard
etc. The touch driver and audio driver were taken from the Xscale BSP and
modified accordingly.
The approach I have taken with the serial driver is to use the serial driver
supplied with the Xscale BSP and modified it. I would very grateful if
someone could advise and help me on how I can test the com ports. Are there
any test applications or the like that I can use to test the com ports,
(irda, standard serial tx, rx no handshaking)
Regards
- Next message: mindengxue: "about DVDROM"
- Previous message: Chris Muench: "Re: Trying to port a PCMCIA driver from a BSP4.1 to CE5"
- Next in thread: Michael Schaffner, P.E.: "Re: Test Com Ports Xscale Wince 4.2"
- Reply: Michael Schaffner, P.E.: "Re: Test Com Ports Xscale Wince 4.2"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
