Re: Connecting to device for debugging

From: Yannick Chamming's [eMVP] (ychammings_nospam_at_adeset.com)
Date: 11/04/04 

Date: Thu, 4 Nov 2004 08:30:34 +0100

Do you mean that when you download you are copying your image to flash so
that your device can boot without loading the image.

If yes, it means probably that your Bootloader is designed to not activate
KITL when booting from flash, to be able to have a CE device that could run
without a KITL connection (when you activate the KITL connexion, the CE
kernel will halt till the connection is established, so it means that you
won't be ablme to boot your device if you don't have a PB waiting for KITL
connection). Consequenlty, the CE image will not try to initiate a KITL
connexion, which explains why PB is waiting for connection. 

--
----------------------------------------------------------------
Yannick Chamming's (eMVP)
ADESET
Windows Embedded Manager
ychammings AT adeset DOT com>
http://www.adeset.com
Tél  : +33 (0)4.72.18.57.77
Fax : +33 (0)4.72.18.57.78
----------------------------------------------------------------
"Glenn I. Klausen" <glennik@idex.no> wrote in message
news:OX42SmbwEHA.1264@TK2MSFTNGP12.phx.gbl...
>
> Hi
>
> I've just downloaded the Nk.bin file using the EBoot and platform
> builder. The remote connection in platform builder was configured using
> ethernet. There are no DHCP server present in the network, so I used
> statically configured IP addresses in both EBoot and on the host PC
> (192.168.0.10 Host PC, 192.168.0.11 device), and the download was
> succcessful. WinCE started up and I got the promt in the shell window in
> Platform Builder. But, when I restarted the device then Platform Builder
> was unable to connect to the device.
>
> I believe that I have to configure WinCE to use a static IP address to
> connect to Platform Builder, but how do I do that?
>
> Glenn
>

Relevant Pages

  • Re: Running active sync on versalogic python board
    ... Might be related to triggering Ethernet ... KITL or something. ... New Connection in order to see the available COM ports, ... download the nk.bin file (CE5.0, ethernet download using static IP and ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Trying to wrap my head around WinCE development process
    ... them or debug them. ... connection but the only way I get a connection is to reboot the target ... between device and Platform Builder is done via KITL, usually over Ethernet, ... For OS development, you Sysgen, then either Attach Device and download the ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Running active sync on versalogic python board
    ... that uses KITL, *then* you can just connect over that same KITL connection ... you can use the old 'Export the registry using Remote Registry Editor ... New Connection in order to see the available COM ports, ... download the nk.bin file (CE5.0, ethernet download using static IP and ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Windows CE 6.0 remote tools broken?
    ... automatically running when I try remote tools. ... the KITL transport or whatever it is called which is independant. ... sure if Bevan could send some debug messages. ... I can succesfully build an OS in platform builder CE 6.0, ...
    (microsoft.public.windowsce.platbuilder)
  • RE: Cannot Install Windows Media Player 11 beta
    ... Setup version 10.00.00.3646.] ... Checking for new UDB. ... We 'will' force a connection. ... Created instance of download manager. ...
    (microsoft.public.windowsmedia.player)