Re: unable to boot cepc from HD
From: Radha Kumar Reddy (RadhaKumarReddy_at_discussions.microsoft.com)
Date: 11/01/04
- Next message: David Liao \(MS\): "Re: How does device notify PC's ActiveSync that USB connection is already reset ?"
- Previous message: Paul G. Tobey [eMVP]: "Re: QFE's ?"
- Next in thread: wurli: "Re: unable to boot cepc from HD"
- Reply: wurli: "Re: unable to boot cepc from HD"
- Messages sorted by: [ date ] [ thread ]
Date: Mon, 1 Nov 2004 09:23:03 -0800
Add to the above,
I edited the boot.ini and gave binFile = nk.bin
Also gave BakBinFile = eboot.bin
But when I boot the HD, it gives the following message and hangs.
Windows CE BIOS Boot Loader
Windows CE BIOS Boot Loader Version 2.2 ( Built mar 2004 )
>From the source code I see that Both the above messages are welcome messages.
The next statement to be executed was to display Splash Screen.
Though in my case the splash screen was not displayed, It didnot give any
error message.
I could not follow through the details.
I previously used to get a splash screen on a VIA mini-ITX board with the
same nk.bin
Now I am not getting the splash screen also.
No error messages.
Can some one help me!!
thnx,
ryotson.
"Sujith" wrote:
> post the error message may be some one can help.
>
> Regards
> Sujith
>
> "Radha Kumar Reddy" <RadhaKumarReddy@discussions.microsoft.com> wrote in
> message news:7E1F3B24-08AD-4C79-8D62-16ABF2D54F73@microsoft.com...
> > Thanks Sujith,
> > I tried to boot winCE from hard disk. I did what exactly was told in the
> > tutorial ->
> > created to disks ( setup and boot ) ,
> > formatted the HD,
> > setup the environment,
> > copied the files from bootdisk to HD,
> > copied the nk.bin by connecting this HD to another system as slave.
> > And made change in autoexec.bat to loadcepc nk.bin. ( I didnot give any
> cmd
> > line options )
> > But when I boot the cepc, it gives the splash screen and jumps to blue
> > screen with some error number.
> >
> > I do not understand why it doesnot boot. I am left with no clues. any help
> > in this regard is of great appreciation.
> >
> > thnx.
> > Radha Kumar Reddy.
> >
> > "Sujith" wrote:
> >
> > > Hi,
> > > so basically it is downloading..
> > > good. may be you can trap the debug messages using the other COM port
> and
> > > check-out what went wrong.
> > > possible options could be.. the display driver should be the same as the
> > > target machine.. not host machine..
> > > more over are you able to get the machine id in the configure remote
> > > connection, ethernet.settings..?
> > > if yes.. ok. if no.. add the correct driver for the device(ethernet). it
> > > should work at any cost..
> > > regards
> > > Sujith
> > > "Radha Kumar Reddy" <Radha Kumar Reddy@discussions.microsoft.com> wrote
> in
> > > message news:A21B40CB-2DBA-45CA-9242-0421485DBE81@microsoft.com...
> > > > h/w platform: a p4 desktop
> > > > winCE platform used : 5.0 CEPC
> > > > eboot : when I boot from floppy and select eboot option, it tries to
> > > access
> > > > the host machine but in vain, displays an error msg saying "jumping to
> > > > 0x...." some hex code.
> > > > sboot : I connected the target PC to host using serial cable, used
> sboot
> > > > option to download. the target displays msg "jumping to 0x...." some
> hex
> > > code
> > > > other than the above. BUT the host **starts** download process to
> target.
> > > > takes a lot of time. but at the end nothing happens at target even
> after
> > > > download completes.
> > > >
> > > > I am new to WinCE. unable to understand whats happening. please help
> me
> > > out.
> > > > Thanks.
> > > > Radha Kumar Reddy.
> > >
> > >
> > >
>
>
>
- Next message: David Liao \(MS\): "Re: How does device notify PC's ActiveSync that USB connection is already reset ?"
- Previous message: Paul G. Tobey [eMVP]: "Re: QFE's ?"
- Next in thread: wurli: "Re: unable to boot cepc from HD"
- Reply: wurli: "Re: unable to boot cepc from HD"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
