Platform hangs if PB is not connected with the target

From: Tang (ymtang_at_gmail.com)
Date: 10/28/04 

Date: 27 Oct 2004 18:15:02 -0700

Hi,

I am working on Intel PXA27x(Bulverde) platform. I enabled CE target
control and KITL in the platform setting, built an OS image, flashed
it to the target. I powered on the board, if PB is connected with the
target, everything works fine. But if PB is not connected, OS didn't
start.

Do I have to connect PB with the target if KITL is enabled?

Thanks in advance

Tang

Relevant Pages

  • KITL only working in Polling Mode (CE 6.0 on an x86 CEPC)
    ... "Hello World" applications on the target with no problem. ... I have been able get the KITL debugger to work in "Polling Mode" ... ProcessAdminMsg: Receive Config message for service DBGMSG ...
    (microsoft.public.windowsce.platbuilder)
  • Re: CE 4.2 Passive Kitl
    ... Once EBOOT runs on the target, a TFTP session can be established ... with the Platform Builder, assuming you asked there to Download the image. ... the KD and KITL are in the ... Debugging and other JIT Debugging features. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Wartime role for overseas USAF Aggressor squadrons?
    ... If a Nuclear War were ... Several years ago, they built a new law enforcement center in Jamestown, ... as Jamestown was not considered a likely target; ... Wrong, the refinery could have been put back into operation, ...
    (rec.aviation.military)
  • Freeze after "enabling adapter ints"
    ... now successfully loads on my target. ... KITL is enabled. ... Details of the freeze: the download proceeds to completion, and, according ... to the debug output on the host, the debugger attaches. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: KITL not Working
    ... Windows CE Kernel for MIPS Built on Mar 29 2005 at 14:01:11 ... Starting KITL over Ethernet ... ApplyFilter: MULTICAST OFF ... Windows CE Image built with KITL support and Target Control ...
    (microsoft.public.windowsce.platbuilder)