How emulate re-insert PCMCIA card on platform CE.NET 4.1

From: vlad (vladb7_at_hotmail.com)
Date: 09/28/04

  • Next message: kw: "Re: repllog and CE 5.0" 
    Date: 28 Sep 2004 13:07:42 -0700

    Hi!
    I have video grabber PCMCIA card and factory driver. After install
    driver for this card , i can't use card. Only after re-insert or
    Hard-reset card working ok. How emulate re-insert card....without
    reset or remove and insert card.
    I use eVC++ application for communication with this card.

    Thank you!!!!

  • Next message: kw: "Re: repllog and CE 5.0"

    Relevant Pages

    • Re: How emulate re-insert PCMCIA card on platform CE.NET 4.1
      ... > I have video grabber PCMCIA card and factory driver. ... After install ... Only after re-insert or ...
      (microsoft.public.windowsce.platbuilder)
    • Re: As a RULE - re CFs IN cameras
      ... Having to eject and re-insert the card for many times ... CAN damage the pins it seems....right? ...
      (rec.photo.digital)
    • Re: Netgear 802.11g Wireless Notebook Card
      ... Well that's pretty good words from gateway, ... all drivers or software you installed for the card, reboot pc and ... then try to re-insert and see if Win XP will see it. ... > inserted card and won't find new hardware. ...
      (microsoft.public.windowsxp.hardware)
    • Re: As a RULE - re CFs IN cameras
      ... so the CF card is OK to leave IN the digital camera ... for an indefinate period.... ... Having to eject and re-insert the card for many times ...
      (rec.photo.digital)