Re: How to delete a feature type in PB4.2

From: Yannick Chamming's [eMVP] (ychammings_nospam_at_adeset.com)
Date: 09/24/04 

Date: Fri, 24 Sep 2004 17:36:31 +0200

you should also remove the group (icon with 3 cylinders) to remove the
support 

--
----------------------------------------------------------------
Yannick Chamming's (eMVP)
ADESET
Windows Embedded Manager
ychammings AT adeset DOT com>
http://www.adeset.com
Tél  : +33 (0)4.72.18.57.77
Fax : +33 (0)4.72.18.57.78
----------------------------------------------------------------
"olol" <coocoo@citiz.net> wrote in message
news:etCam1foEHA.3560@TK2MSFTNGP10.phx.gbl...
> How to delete a feature type in PB4.2
>
> My platform( Sitsang: a reference board of PXA250) are difficult to start.
> I found that there are some problems on usb drivers. Since I am not using
> USB
> now, I just want to delete this device type to overcome it temporarily.
>
> But In Feature View of PB4.2, I right-clicked "USB Function", and choose
> "Delete", After a long time "Getting feature variables.."
>
> It is no use! The USB device type still stand there!
> If I click "Build > Rebuild Platform", it said the features was
unresolved!
>
>
>
> (
>  And here are some complaints to MS:
>  why it take so long time to just modify a small feature.
>  It just like that I want to remove a window-glass, but MS destroy
>  the whole house and rebuild a new one!
> )
>
>
>
> --------------------------------------------------------------------------
----------
> Setting the "Exclude from build" flag on the PCMCIA (PC Card) driver for
the
> LIZA - SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration
because
> the necessary support is not present in your platform.
> Setting the "Exclude from build" flag on the Local Area Networking (LAN)
> devices driver for the LIZA - SITSANG: ARMV4 Win32 (WCE ARMV4) Release
build
> configuration because the necessary support is not present in your
platform.
> Setting the "Exclude from build" flag on the XSC1BD Touch Controller
driver
> for the LIZA - SITSANG: ARMV4 Win32 (WCE ARMV4) Release build
configuration
> because the necessary support is not present in your platform.
> Setting the "Exclude from build" flag on the Storage Devices driver for
the
> LIZA - SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration
because
> the necessary support is not present in your platform.
> Setting the "Exclude from build" flag on the PCI Bus driver for the LIZA -
> SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration because the
> necessary support is not present in your platform.
> Setting the "Exclude from build" flag on the Audio driver for the LIZA -
> SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration because the
> necessary support is not present in your platform.
> Setting the "Exclude from build" flag on the Power Button driver for the
> LIZA - SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration
because
> the necessary support is not present in your platform.
> Setting the "Exclude from build" flag on the Keyboard/Mouse driver for the
> LIZA - SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration
because
> the necessary support is not present in your platform.
> Setting the "Exclude from build" flag on the Display driver for the LIZA -
> SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration because the
> necessary support is not present in your platform.
> Setting the "Exclude from build" flag on the Serial driver for the LIZA -
> SITSANG: ARMV4 Win32 (WCE ARMV4) Release build configuration because the
> necessary support is not present in your platform.
> Removing the "Exclude from build" flag from the PCMCIA (PC Card) driver
for
> the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration
> because it is now supported by your platform.
> Removing the "Exclude from build" flag from the Serial driver for the
LIZA -
> SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because it
is
> now supported by your platform.
> Removing the "Exclude from build" flag from the Local Area Networking
(LAN)
> devices driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release
> build configuration because it is now supported by your platform.
> Removing the "Exclude from build" flag from the Power Button driver for
the
> LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration
> because it is now supported by your platform.
> Removing the "Exclude from build" flag from the Display driver for the
> LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration
> because it is now supported by your platform.
> Removing the "Exclude from build" flag from the Audio driver for the
LIZA -
> SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because it
is
> now supported by your platform.
> Removing the "Exclude from build" flag from the USB Function driver for
the
> LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration
> because it is now supported by your platform.
> Removing the "Exclude from build" flag from the Storage Devices driver for
> the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration
> because it is now supported by your platform.
> Removing the "Exclude from build" flag from the Keyboard/Mouse driver for
> the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration
> because it is now supported by your platform.
> Setting the "Exclude from build" flag on the PCMCIA (PC Card) driver for
the
> LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration
> because the necessary support is not present in your platform.
> Setting the "Exclude from build" flag on the Local Area Networking (LAN)
> devices driver for the LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release
> build configuration because the necessary support is not present in your
> platform.
> Setting the "Exclude from build" flag on the USB Function driver for the
> LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration
> because the necessary support is not present in your platform.
> Setting the "Exclude from build" flag on the Storage Devices driver for
the
> LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration
> because the necessary support is not present in your platform.
> Setting the "Exclude from build" flag on the Audio driver for the LIZA -
> SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because the
> necessary support is not present in your platform.
> Setting the "Exclude from build" flag on the Power Button driver for the
> LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration
> because the necessary support is not present in your platform.
> Setting the "Exclude from build" flag on the Keyboard/Mouse driver for the
> LIZA - SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration
> because the necessary support is not present in your platform.
> Setting the "Exclude from build" flag on the Display driver for the LIZA -
> SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because the
> necessary support is not present in your platform.
> Setting the "Exclude from build" flag on the Serial driver for the LIZA -
> SITSANG: ARMV4I Win32 (WCE ARMV4I) Release build configuration because the
> necessary support is not present in your platform.
> Added the Toolhelp API feature (SYSGEN_TOOLHELP) to the platform.
> Added the Pocket Internet Explorer HTML View (WEBVIEW) feature
> (SYSGEN_WEBVIEW) to the platform.
> Added the Standard I/O (STDIO) feature (SYSGEN_STDIO) to the platform.
> Added the Standard I/O ASCII (STDIOA) feature (SYSGEN_STDIOA) to the
> platform.
> Added the Internet Explorer Multiple-Language Base API feature
> (SYSGEN_MLANG) to the platform.
> Added the Storage Manager feature (SYSGEN_STOREMGR) to the platform.
> Added the CAB File Installer/Uninstaller feature (SYSGEN_WCELOAD) to the
> platform.
> Added the Windows Internet Services feature (SYSGEN_WININET) to the
> platform.
> Added the URL Moniker Services feature (SYSGEN_URLMON) to the platform.
> Added the RAM and ROM File System feature (SYSGEN_FSRAMROM) to the
platform.
> Added the C++ Exception Handling feature (SYSGEN_CPP_SEH) to the platform.
> Added the Sample Internet Explorer 6.0 Internet Options Control Panel
> feature (SYSGEN_INETCPL) to the platform.
> Added the Software-based Input Panel Driver feature (SYSGEN_SOFTKB) to the
> platform.
> Added the Tahoma (Subset 1_07) feature (SYSGEN_FONTS_TAHOMA_1_07) to the
> platform.
> Added the Internet Explorer Browser Control Host feature (SYSGEN_SHDOCVW)
to
> the platform.
> Added the RAM-based Registry feature (SYSGEN_FSREGRAM) to the platform.
> Added the National Language Support (NLS) feature (SYSGEN_CORELOC) to the
> platform.
> Added the Run-Time Type Information feature (SYSGEN_RTTI) to the platform.
> Added the Telephony API (TAPI 2.0) feature (SYSGEN_TAPI) to the platform.
> Added the USB Function driver to the platform.
> 1 warnings found. Not all features or drivers could be added. The build
> system will automatically include these when you build the platform.
>
> --------------------------------------------------------------------------
----------
>
>