Re: rtl8139 problem

From: K. S. Huang (ks_huang_at_alphanetworks.com.remove.this)
Date: 08/12/04 

Date: Thu, 12 Aug 2004 22:49:06 +0800

if you want to set the default IP address of a PCI NIC,
you sould set valuse under [HKEY_LOCAL_MACHINE\Comm\PCI\XXX\Parms\TcpIp]

for example
[HKEY_LOCAL_MACHINE\Comm\PCI\RTL81391\Parms\TcpIp]

you could also try to ping from other PC to your device,
and try to use arp -a to see if the IP->MAC is got properly!

"kamaal" <kamaalwince@rediffmail.com>
???????:dd2f4359.0408120407.e007e6e@posting.google.com...
> Hi all,
> I'm getting my RTL8139 driver loaded at last!!.
> I put the following in my registry settings and it got loaded.
>
> In project.reg:
>
> [HKEY_LOCAL_MACHINE\Comm\RTL81391]
> "DisplayName"="RTL8139"
> "Order"=dword:10
> "Group"="NDIS"
> "ImagePath"="RTL8139.dll"
>
> [HKEY_LOCAL_MACHINE\Comm\RTL8139\Linkage]
> "Route"=multi_sz:"RTL8139"
>
> [HKEY_LOCAL_MACHINE\Comm\Tcpip\Linkage]
> "Bind"="RTL81391"
>
> [HKEY_LOCAL_MACHINE\Comm\RTL8139\Parms]
> "FriendlyName"="RTL8139"
> "BusNumber"=dword:0
> "BusType"=dword:5
> "IoBase"=dword:xxxxxxxx
> "IRQ"=dword:yy
> "MediaType"=dword:1
> "AdapterType"=dword:0
>
> [HKEY_LOCAL_MACHINE\Comm\RTL8139\Parms\TcpIp]
> "EnableDHCP"=dword:0
> "DefaultGateway"=multi_sz:"xxx.xxx.x.1"
> "IpAddress"=multi_sz:"xxx.xxx.x.xxx"
> "Subnetmask"=multi_sz:"255.255.255.0"
> "UseZeroBroadcast"=dword:0
>
>
> Now, I run ipconfig and it shows the ip configuration.
>
> If I try to ping to any other port in the network,the ping fails
> giving the error as: transmit failed:error code 11010
>
> Now what can I do?I am almost nearing the solution.But I'm stuck at
> some point.How can I successfully ping?Do I need to put some other
> registry settings?
>
> -Kamaal
>
>
>
>
> "K. S. Huang" <ks_huang@AlphaNetworks.com_remove.this> wrote in message
news:<OaLHc0BgEHA.3024@TK2MSFTNGP10.phx.gbl>...
> > do you check out the registr under [HKLM\BuiltIn\PCI\Instance]??
> > the keys under Instance will be created by PCIBUS.DLL, you don't need to
set
> > any default value for it.
> >
> >
> >
> > "kamaal" <kamaalwince@rediffmail.com>
> > ???????:dd2f4359.0408110255.4f0f3ac5@posting.google.com...
> > > Hi,
> > > I'm using a on-board ethernet port to download image/KITL.This is not
> > > the RTL8139 port.
> > >
> > > I want to use a seperate RTL8139 NIC mounted on PCI back plane as
> > > product ethernet.I want to use it to establish connection with host
> > > for CETK.
> > > This is a headless platform without display.
> > > If I disable KITL, how can I run clientside.exe?Does RTL8139 driver
> > > really conflict with KITL?
> > >
> > > Thanks and Regards,
> > > Kamaal
> > >
> > >
> > >
> > > "K. S. Huang" <ks_huang@AlphaNetworks.com_remove.this> wrote in
message
> > news:<eoaE241fEHA.2984@tk2msftngp13.phx.gbl>...
> > > > Is there only one 8139 on your device??
> > > > If so, please diable the KITL.
> > > > Even you diable the VMini, the KITL is still using your 8139 as its
> > EthDBG
> > > > port.
> > > >
> > > > "kamaal" <kamaalwince@rediffmail.com>
> > > > ???????:dd2f4359.0408101958.70558239@posting.google.com...
> > > > > Hi folks,
> > > > >
> > > > > Thanks for all ur suggestions.
> > > > > I have taken care that IMGNOSHAREETH=1 and BSP_NOSHAREETH=1 so as
to
> > > > > disable VMINI.
> > > > > I have also made sure that BSP_NIC_RTL8139=1.
> > > > >
> > > > > The driver is also included in OS image(\windows directory).
> > > > >
> > > > > But what could be the problem that it is getting stuck at
> > > > > NdisMAllocateSharedMemory()?
> > > > > It's really frustrating.
> > > > > Do I need to write registry entries under PCI\Instance key
also?(like
> > > > > subvendorid,subsystemid etc).
> > > > >
> > > > > I'd be very greatful to u all if I can come out of this jungle.
> > > > >
> > > > > Kamaal
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > kamaalwince@rediffmail.com (kamaal) wrote in message
> > news:<dd2f4359.0408100624.54cafc48@posting.google.com>...
> > > > > > Hi folks,
> > > > > >
> > > > > > I'm getting a peculiar problem in using rtl8139D network
card(PCI
> > > > > > based).
> > > > > >
> > > > > > 1.Does the driver for rtl8139 support RTL8139D chipset?
> > > > > > 2.I'm unable to load the driver successfully and use it as a
product
> > > > > > ethernet.
> > > > > > When I build image in debug mode I get the following messages:
> > > > > >
> > > > > >
> > > > > > Welcome to the Windows CE Shell. Type ? for help.
> > > > > >
> > > > > > 4294768140 PID:27fa92ba TID:27f764a2 0x87fac670: Shell: No
extension
> > > > > > DLLs found
> > > > > > 4294768160 PID:e7f768ca TID:e7f7647a 0x87f76660: >>> Loading
module
> > > > > > ceddk.dll at address 0x03EF0000-0x03EF7000 (RW data at
> > > > > > 0x01FF5000-0x01FF5068)
> > > > > > Loaded symbols for
> > 'E:\WINCE420\PUBLIC\MORNING_21\RELDIR\XYZDEBUG\CEDDK.DLL'
> > > > > > 4294768161 PID:e7f768ca TID:e7f7647a 0x87f76660:
> > > > > > Ceddk!CalibrateStallCounter: Enter
> > > > > > 4294768162 PID:e7f768ca TID:e7f7647a 0x87f76660:
> > > > > > Ceddk!CalibrateStallCounter: Could not find stall counter
> > > > > > 4294768162 PID:e7f768ca TID:e7f7647a 0x87f76660:
> > > > > > Ceddk!BeginCalibration: min(0) max(0)
> > > > > > 4294768163 PID:e7f768ca TID:e7f7647a 0x87f76660:
> > > > > > Ceddk!BeginCalibration: elapsed is 0
> > > > > > 4294768164 PID:e7f768ca TID:e7f7647a 0x87f76660:
> > > > > > Ceddk!BeginCalibration: delay is 10
> > > > > > 4294768164 PID:e7f768ca TID:e7f7647a 0x87f76660:
DEVICE!DevloadInit
> > > > > > 4294768165 PID:e7f768ca TID:e7f7647a 0x87f76660:
DEVICE!InitDevices:
> > > > > > Root Key is Drivers\BuiltIn.
> > > > > > 4294768166 PID:e7f768ca TID:e7f7647a 0x87f76660:
> > > > > > DEVICE!ActivateDeviceEx(Drivers\BuiltIn) entered
> > > > > > 4294768171 PID:e7f768ca TID:e7f7647a 0x87f76660: >>> Loading
module
> > > > > > regenum.dll at address 0x03F50000-0x03F57000 (RW data at
> > > > > > 0x01FFD000-0x01FFD49C)
> > > > > > Loaded symbols for
> > 'E:\WINCE420\PUBLIC\MORNING_21\RELDIR\XYZDEBUG\REGENUM.DLL'
> > > > > > 4294768202 PID:e7f768ca TID:e7f7647a 0x87f76660:
> > > > > > DEVICE!ActivateDeviceEx(Drivers\BuiltIn\PCI) entered
> > > > > > 4294768212 PID:e7f768ca TID:e7f7647a 0x87f76660: >>> Loading
module
> > > > > > XYZpcibus.dll at address 0x03C20000-0x03C39000 (RW data at
> > > > > > 0x01FCE000-0x01FCE71C)
> > > > > > Loaded symbols for
> > 'E:\WINCE420\PUBLIC\MORNING_21\RELDIR\XYZDEBUG\XYZPCIBUS.DLL'
> > > > > > 4294768257 PID:e7f768ca TID:e7f7647a 0x87f76660: device ID 8139
> > vendor
> > > > > > ID 10ec
> > > > > > 4294768418 PID:e7f768ca TID:e7f7647a 0x87f76660:
> > > > > > DEVICE!ActivateDeviceEx(Drivers\BuiltIn\PCI\Instance) entered
> > > > > > 4294768421 PID:e7f768ca TID:e7f7647a 0x87f76660:
> > > > > > DEVICE!ActivateDeviceEx(Drivers\BuiltIn\PCI\Instance\RTL81391)
> > entered
> > > > > > 4294768440 PID:e7f768ca TID:e7f7647a 0x87f76660: >>> Loading
module
> > > > > > ndis.dll at address 0x03D80000-0x03DEF000 (RW data at
> > > > > > 0x01FE1000-0x01FE1AB4)
> > > > > > Loaded symbols for
> > 'E:\WINCE420\PUBLIC\MORNING_21\RELDIR\XYZDEBUG\NDIS.DLL'
> > > > > > 4294768484 PID:e7f768ca TID:e7f7647a 0x87f76660: NDIS:
> > > > > > RebindAdaptersOnResume = 0
> > > > > > 4294768494 PID:e7f768ca TID:87f3c26a 0x87f3c738: NDIS:
> > > > > > +ProcessPcmciaDeviceNotificationMessages
> > > > > > 4294768496 PID:e7f768ca TID:87f3c26a 0x87f3c738: NDIS:
> > > > > > -ProcessPcmciaDeviceNotificationMessages
> > > > > > 4294768506 PID:e7f768ca TID:e7f7647a 0x87f76660: >>> Loading
module
> > > > > > rtl8139.dll at address 0x03D50000-0x03D5C000 (RW data at
> > > > > > 0x01FDD000-0x01FDD6E8)
> > > > > > Loaded symbols for
> > 'E:\WINCE420\PUBLIC\MORNING_21\RELDIR\XYZDEBUG\RTL8139.DLL'
> > > > > > 4294768537 PID:e7f768ca TID:e7f7647a 0x87f76660: RTL8139:
> > > > > > DLL_PROCESS_ATTACH
> > > > > > 4294768538 PID:e7f768ca TID:e7f7647a ==>NdisInitializeWrapper
> > > > > > 4294768539 PID:e7f768ca TID:e7f7647a <==NdisInitializeWrapper
> > > > > > 4294768540 PID:e7f768ca TID:e7f7647a ==>NdisMRegisterMiniport:
> > > > > > NdisWrapperHandle 00040800
> > > > > > 4294768541 PID:e7f768ca TID:e7f7647a
==>ndisRegisterMiniportDriver:
> > > > > > NdisWrapperHandle 00040800
> > > > > > 4294768543 PID:e7f768ca TID:e7f7647a
<==ndisRegisterMiniportDriver:
> > > > > > MiniBlock 00040870
> > > > > > 4294768543 PID:e7f768ca TID:e7f7647a NdisMRegisterMiniport:
> > MiniBlock
> > > > > > 00040870
> > > > > > 4294768544 PID:e7f768ca TID:e7f7647a <==NdisMRegisterMiniport:
> > > > > > MiniBlock 00040870, Status 0
> > > > > > 4294768546 PID:e7f768ca TID:e7f7647a
> > > > > > 4294768548 PID:e7f768ca TID:e7f7647a ndisMInitializeAdapter:
> > Miniport
> > > > > > 00040A70,
> > > > > > 4294768550 PID:e7f768ca TID:e7f7647a
==>ndisQueueMiniportOnDriver:
> > > > > > Miniport 00040A70, MiniBlock 00040870
> > > > > > 4294768551 PID:e7f768ca TID:e7f7647a
<==ndisQueueMiniportOnDriver:
> > > > > > Miniport 00040A70, MiniBlock 00040870, rc 1
> > > > > > 4294768552 PID:e7f768ca TID:e7f7647a 0x87f76660: RTL8139:: Will
> > > > > > attempt NdisMAllocateSharedMemory()..
> > > > > > 4294768554 PID:e7f768ca TID:e7f7647a ==>NdisMSetAttributesEx:
> > Miniport
> > > > > > 00040A70
> > > > > > 4294768554 PID:e7f768ca TID:e7f7647a 0x87f76660: RTL8139:: Use
> > > > > > NdisMAllocateSharedMemory().
> > > > > > 4294768557 PID:e7f768ca TID:e7f7647a Speed/Duplex Mode
selected:1
> > > > > > 4294768557 PID:e7f768ca TID:e7f7647a WriteOurCapability
> > > > > > 4294768558 PID:e7f768ca TID:e7f7647a Setup link, link is up
> > > > > > 4294768559 PID:e7f768ca TID:e7f7647a Setup link, peer do not
> > support
> > > > > > it, write our speed/duplex,disable autonegotiation
> > > > > > 4294768559 PID:e7f768ca TID:e7f7647a 0x87f76660: Exception 005
> > > > > > Thread=87f76660 Proc=e7f768ca
> > > > > > 4294768560 PID:e7f768ca TID:e7f7647a 0x87f76660: AKY=00000009
> > > > > > PC=87f51df0 RA=03d54440 BVA=03d504bf
> > > > > > 4294768560 PID:e7f768ca TID:e7f7647a 0x87f76660: Process
> > 'device.exe'
> > > > > >
> > > > > >
> > > > > > My registry settings are as follows:
> > > > > >
> > > > > > Common.reg:
> > > > > > ; @CESYSGEN IF CE_MODULES_RTL8139
> > > > > > IF BSP_NOPCIBUS !
> > > > > > IF BSP_NOETHER !
> > > > > > IF BSP_NIC_RTL8139
> > > > > >
> > > > > > [HKEY_LOCAL_MACHINE\Comm\RTL8139]
> > > > > > ;LOC_FRIENDLYRTL8139
> > > > > > "DisplayName"=mui_sz:"netmui.dll,#9011"
> > > > > > "Group"="NDIS"
> > > > > > "ImagePath"="RTL8139.dll"
> > > > > >
> > > > > > ;
> > > > > > ; Template the PCI bus driver uses to match DLINK RTL cards and
> > built
> > > > > > in RTL on Geode.
> > > > > > ;
> > > > > >
> > > > > > [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI\Template\RTL8139]
> > > > > > "Dll"="NDIS.dll"
> > > > > > "Class"=dword:02
> > > > > > "SubClass"=dword:00
> > > > > > "ProgIF"=dword:0
> > > > > > ; "VendorID"=multi_sz:"1186","1113","10ec","10ec","13D1"
> > > > > > "VendorID"=multi_sz:"10EC"
> > > > > > ; "DeviceID"=multi_sz:"1300","1211","8139","8138","AB06"
> > > > > > "DeviceID"=multi_sz:"8139"
> > > > > > ; This is replaced by Prefix key to support CardBus adapter.
> > > > > > ; Adapter will now be instantiated via NDS_INIT.
> > > > > > ;
> > > > > > ; "Entry"="NdisPCIBusDeviceInit"
> > > > > > ;
> > > > > > "Prefix"="NDS"
> > > > > > "Transceiver"=dword:3
> > > > > > "DuplexMode"=dword:1
> > > > > > "EarlyTxThreshold"=dword:10000
> > > > > >
> > > > > > ;
> > > > > > ; Use shared ISR handler for the RTL8139
> > > > > > ;
> > > > > > "IsrDll"="giisr.dll"
> > > > > > "IsrHandler"="ISRHandler"
> > > > > > "PortIsIO"=dword:1
> > > > > > "PortOffset"=dword:3E
> > > > > > "PortSize"=dword:2
> > > > > > "PortMask"=dword:C07F
> > > > > > "UseMaskReg"=dword:1
> > > > > > "MaskOffset"=dword:3c
> > > > > >
> > > > > > ENDIF BSP_NIC_RTL8139
> > > > > > ENDIF BSP_NOETHER !
> > > > > > ENDIF BSP_NOPCIBUS !
> > > > > > ; @CESYSGEN ENDIF CE_MODULES_RTL8139
> > > > > >
> > > > > >
> > > > > >
> > > > > > platform.reg:
> > > > > >
> > > > > > ; @CESYSGEN IF CE_MODULES_RTL8139
> > > > > > IF BSP_NIC_RTL8139
> > > > > > [HKEY_LOCAL_MACHINE\Comm\ConnectionSharing]
> > > > > > "PrivateInterface"="PCI\\RTL81391"
> > > > > >
> > > > > > [HKEY_LOCAL_MACHINE\Comm\PCI\RTL81391\Parms\TcpIp]
> > > > > > "EnableDHCP"=dword:0
> > > > > > "DefaultGateway"=""
> > > > > > "UseZeroBroadcast"=dword:0
> > > > > > "IpAddress"="192.168.0.1"
> > > > > > "Subnetmask"="255.255.255.0"
> > > > > >
> > > > > > ; @CESYSGEN IF SERVERS_MODULES_WEBPROXY
> > > > > > ; DHCP Scope option for proxy auto-discovery
> > > > > > [HKEY_LOCAL_MACHINE\Comm\PCI\RTL81391\DhcpAllocator\DhcpOptions]
> > > > > >
> > > >
> >
"252"=hex:68,74,74,70,3a,2f,2f,31,39,32,2e,31,36,38,2e,30,2e,31,3a,38,30,38,
> > > > 30,2f,70,72,6f,78,79,2e,70,61,63,00
> > > > > > ; @CESYSGEN ENDIF SERVERS_MODULES_WEBPROXY
> > > > > >
> > > > > > ENDIF BSP_NIC_RTL8139
> > > > > >
> > > > > >
> > > > > > Apart from these,I added the following entries in project.reg.
Do
> > the
> > > > > > IRQ and IOBase entries mandatory?
> > > > > >
> > > > > > project.reg:
> > > > > >
> > > > > > [HKEY_LOCAL_MACHINE\Comm\RTL81391]
> > > > > > "DisplayName"="RTL8139"
> > > > > > "Group"="NDIS"
> > > > > > "ImagePath"="RTL8139.dll"
> > > > > >
> > > > > > [HKEY_LOCAL_MACHINE\Comm\RTL8139\Linkage]
> > > > > > "Route"=multi_sz:"RTL8139"
> > > > > >
> > > > > > [HKEY_LOCAL_MACHINE\Comm\Tcpip\Linkage]
> > > > > > "Bind"="RTL81391"
> > > > > >
> > > > > > [HKEY_LOCAL_MACHINE\Comm\RTL8139\Parms]
> > > > > > "FriendlyName"="RTL8139"
> > > > > > "BusNumber"=dword:0
> > > > > > "BusType"=dword:5
> > > > > > ; "IoBase"=dword:16000000
> > > > > > ; "IoLen"=dword:100
> > > > > > ; "IRQ"=dword:10
> > > > > >
> > > > > >
> > > > > > [HKEY_LOCAL_MACHINE\Comm\RTL8139\Parms\TcpIp]
> > > > > > "EnableDHCP"=dword:0
> > > > > > "DefaultGateway"=multi_sz:"192.168.9.1"
> > > > > > "IpAddress"=multi_sz:"192.168.9.131"
> > > > > > "Subnetmask"=multi_sz:"255.255.255.0"
> > > > > > "UseZeroBroadcast"=dword:0
> > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > Regards,
> > > > > > Kamaal