Re: About using Bluetooh.

From: Eric Pan (pansty_at_vip.sina.com)
Date: 06/28/04 

Date: Mon, 28 Jun 2004 08:48:05 +0800

Thanks for your reply!

However, i have no BSP and should export the driver to a cab file to
manually install it on the board. Things seems to be same but there is a
question remains: you mean the common driver provided in PB be used without
mofication?

Gonna take a back look at PB help,thanks:)

"kmk" <kmknospam@msn.com> 写入消息新闻
:MPG.1b48aa8b674ce69e989680@msnews.microsoft.com...
> Your BT device is USB or UART?
>
> Just include Bluetooth Univeral Drivers in your BSP and should work.
>
> If your BT device is UART based, you may have to change the port
> name for UART (bthuart) driver.
>
> /kmk
> In article <ekNHha0WEHA.1164@tk2msftngp13.phx.gbl>, pansty@vip.sina.com
> says...
> > I have a pxa255 board, the system is wince.net 4.2. Want to add
bluefunction
> > through dongles using usb or BT com, but i 'm so puzzled here.
> >
> > Since there is no driver for CE.net provided with these products
> > available(is there?), we have to develop drivers on our own. I took a
look
> > at the sample in PB, that has many files in the folder ,which one should
be
> > modified? My board had provided several dlls about bluetooth, seems to
be
> > the services needed except for the main driver. Don't know what Document
to
> > look up in, the spec made me astrayed. Would anyone direct me a way?
> >
> > And, my goal is to use BT GPS through the dongle, the most straight way
is
> > wanted, then what module alike should i choose?
> >
> > Thanks!!
> >
> >
> >
> >
> >
>

Relevant Pages

  • Re: Incorporating a 3rd party driver into a BSP/Image
    ... any sample code, I though we were talking about a the Summit binaries. ... folder and run? ... As far as 'making it part of my BSP', I'm not sure what that means ... driver into its own catalog item and add/remove them from any OS ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Reg. USB Driver while booting wince 5.0
    ... My USB driver is working in my evaluation board and i was able to ... BSP Interrupt Enable IRQ ... [NOTIFY] ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Reg. USB Driver while booting wince 5.0
    ... Did you remove the component that includes your display driver? ... BSP Interrupt Enable IRQ ... Main thread in proc 4dc85a1a faulted, ...
    (microsoft.public.windowsce.platbuilder)
  • [PATCH 1/1] 8250_kgdb driver reworked
    ... This is the I/O driver for any 8250-compatible UARTs. ... small hooks into the normal serial core so that we can take away the uart and ... for all platforms to always work as an override of the compiled in port. ... static int __init serial8250_init ...
    (Linux-Kernel)
  • Re: Incorporating a 3rd party driver into a BSP/Image
    ... I looked at that help file, ... folder and run? ... You're going to ship this BSP to others for use in creating their own OS ... driver into its own catalog item and add/remove them from any OS ...
    (microsoft.public.windowsce.platbuilder)