Re: About using Bluetooh.

From: Andrew McGrath (andrew.mcgrath_at_mcsoft.com.au)
Date: 06/27/04 

Date: Mon, 28 Jun 2004 09:53:04 +1000

Also if it is UART based, you might need to use the Bluetooth UART only
driver instead of the Universal driver. That was our experience.

Also you might need to add the CSR driver. Tends to be a bit of a
play-around thing as to what to use, especially while you are still
scratching the surface :)

HTH

Andrew McGrath
www.mcsoft.com.au

"kmk" <kmknospam@msn.com> wrote in message
news:MPG.1b48aa8b674ce69e989680@msnews.microsoft.com...
> Your BT device is USB or UART?
>
> Just include Bluetooth Univeral Drivers in your BSP and should work.
>
> If your BT device is UART based, you may have to change the port
> name for UART (bthuart) driver.
>
> /kmk
> In article <ekNHha0WEHA.1164@tk2msftngp13.phx.gbl>, pansty@vip.sina.com
> says...
>> I have a pxa255 board, the system is wince.net 4.2. Want to add
>> bluefunction
>> through dongles using usb or BT com, but i 'm so puzzled here.
>>
>> Since there is no driver for CE.net provided with these products
>> available(is there?), we have to develop drivers on our own. I took a
>> look
>> at the sample in PB, that has many files in the folder ,which one should
>> be
>> modified? My board had provided several dlls about bluetooth, seems to be
>> the services needed except for the main driver. Don't know what Document
>> to
>> look up in, the spec made me astrayed. Would anyone direct me a way?
>>
>> And, my goal is to use BT GPS through the dongle, the most straight way
>> is
>> wanted, then what module alike should i choose?
>>
>> Thanks!!
>>
>>
>>
>>
>>
>

Relevant Pages

  • Re: Bluetooth under Windows CE 5.0
    ... > Please check you don't include Bluetooth CSR support component, ... >> I want to connect my BT device via UART to the platform. ... >> If I select bluetooth UART driver only, after the image been built, I ...
    (microsoft.public.windowsce.embedded)
  • Re: About using Bluetooh.
    ... csr driver here plays like ... > Also if it is UART based, you might need to use the Bluetooth UART only ... > driver instead of the Universal driver. ... > Also you might need to add the CSR driver. ...
    (microsoft.public.windowsce.platbuilder)
  • 2.6.23-rc7 + radeonfb/s2ram
    ... ACPI: IRQ0 used by override. ... registered new interface driver usbfs ... Bluetooth: HCI device and connection manager initialized ...
    (Linux-Kernel)
  • Re: 2.6.23-rc7 + radeonfb/s2ram
    ... ACPI: IRQ0 used by override. ... registered new interface driver usbfs ... Bluetooth: HCI device and connection manager initialized ...
    (Linux-Kernel)
  • Re: [patch 0/2] suspend/resume regression fixes
    ... but it behaves like the old IDE without ACPI. ... registered new interface driver usbfs ... Bluetooth: HCI device and connection manager initialized ...
    (Linux-Kernel)