Re: Issues in building Platform builder

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Bruce Eitman \(eMVP\) (beitmannospam_at_nospam.neo.rr.com)
Date: 06/24/04 

Date: Thu, 24 Jun 2004 16:01:25 -0400

Satish:

That setting is not enabled by many ARM config.bib files.

So, are you building for image in RAM or ROM?
What size RAM or ROM?

It may just be that you need to remove some components from your build. 

-- 
   Bruce Eitman (eMVP)
   Senior Engineer

Relevant Pages

  • Re: 50g questions, programming and OS
    ... At some point i was very enthusiastic about idea of entirely ARM based OS ... -or some other well known AND widely accepted compact platform ... -64MB RAM ... -64MB ROM ...
    (comp.sys.hp48)
  • Re: Copy RAM files to PC
    ... It is not in RAM, it is in ROM. ... Bruce Eitman (eMVP) ...
    (microsoft.public.pocketpc.developer)
  • ColdFire M5271 use 52Kb SRAM for C-stack to test DRAM at OS boot ?
    ... allocate C-stack there to test DRAM at the boot time? ... allocating stack on DRAM and jumping over it during DRAM test - anybody ... I need to run the RAM test before the bootrom copies itself into RAM, ... At this point the system is still executing instructions out of ROM. ...
    (comp.arch.embedded)
  • RE: I have a problem booting with Wce 6.0 (release) on Intel 855 gme b
    ... RAM 81C00000 02400000 RAM ... nk.exe:dwOEMTotalRAM 0 08000000 FIXUPVAR ... reserves for Watson dump capture. ... ceconfig.h (ROM 0x80A4F160) ...
    (microsoft.public.windowsce.embedded)
  • Re: DolphinDOS information needed (addendum)
    ... filled with the disk contents upon inserting every diskette. ... transfers were done from the RAM cache, which was very fast as it ... I have the ROM contents for DD2 and the drive side of DD3. ...
    (comp.sys.cbm)