Convert PB 3.0 build to PB 4.2 build?

From: Neal Davis (spokanedavis_at_excite.com)
Date: 05/28/04 

Date: 28 May 2004 11:25:17 -0700

Hello,

I have a Windows CE 3.0 custom device based on the the StrongArm
SA1110 processor. I have the BSP, OAL, and all custom drivers needed
to build a CE 3.0 image and bootloader using PB 3.0. Note that we have
never used the IDE of PB 3.0 we have always built from the command
line with the PB 3.0 tools.

I would like to move the BSP, OAL, and drivers to PB 4.0 and build a
CE 4.2 image for this device, I believe I should be able to use the
existing bootloader as is without having to rebuild or change it?

I have looked at the PB 4.0 documentation and it does have a little
porting help for doing this - but it is not clear to me the easiest
approach to take.

Can you guys help with what will probably be the easiest steps to do
this? Thanks in advance!

Neal Davis

Relevant Pages

  • Re: Release build
    ... I would stick with the plan to work with the ARM Integrator BSP ... I would think that you need to burn the bootloader into your flash (either ... I would imagine poeple would agree that developing a bootloader from scratch ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Release build
    ... I would stick with the plan to work with the ARM Integrator BSP ... I would think that you need to burn the bootloader into your flash (either ... I would imagine poeple would agree that developing a bootloader from scratch ...
    (microsoft.public.windowsce.embedded)
  • Re: Eboot stalls in OEMInitDebugSerial
    ... You were right the first time - OS configuration has absolutely nothing to ... do with the bootloader. ... > in the BSP but it appears catalog features affect the build. ... I've checked it stalls ...
    (microsoft.public.windowsce.platbuilder)