DHCP Under XScale (PXA255) and Sumsung (2410)
Date: Fri, 30 Apr 2004 15:07:32 +0800
Dear Sirs,
If the LAN cable plug-in when system boot-up, the DHCP can work properly.
After system boot-up the DHCP try to get IP address failure, this time try
to plug-in LAN cable.
The LAN driver can't get DHCP properly no matter the system default set to
DHCP enable.
Is it possible to let our system get the correctly DHCP IP address after LAN
plug-in at the time?
Is it kernel issus or LAN driver issue?
Anybody have idea for this case?
JLL
Relevant Pages
- Re: Problems with Internet / Netgear router on SBS 2003
... Your SBS network has a 'lan' side; your SBS should be the DHCP server for ... The router also has a 'lan' side, and it's on the same addressing as your ... You can elect to turn on the DHPC server for your router; ... Even without DHCP turned on at the router, you can still connect there, you ... (microsoft.public.windows.server.sbs) - Re: ISA Server & a WiFi Hotspot (some DHCP for good measure too)
... have the LAN side of the wireless router be in the 10.0.0.x ... your SBS has two nics - its WAN nic is using 10.0.0.2 ... The SBS handles DHCP for the ... The SBS firewall not only keeps the wireless clients ... (microsoft.public.windows.server.sbs) - Re: VPN vs. VLAN
... Yea I didn't want to get into semantic wars about what a "VLAN" is; ... listening in on the same network as the LAN router's DHCP daemon). ... The LAN Router between the IP Segments needs to be configured to forward ... DHCP Queries to the DHCP Server. ... (microsoft.public.win2000.networking) - [SLE] Re: SOLVED: [SLE] DHCP failure
... I'm running a 3-subnet LAN from a SUSE 9.3 box, and until yesterday I had a functioning LAN with a manually built dhcpd.conf file. ... Then I saved off that file and used YaST to poke around in the dhcp server section and the NIC section. ... (SuSE) - Re: DHCP issues (solved!)
... with the internal LAN (connectivity was lost & I had to input fixed IP's to ... however on switching the policy off the LAN Clients suddenly have DHCP ... on the bottom it shows "Server Local Area Connection". ... (microsoft.public.windows.server.sbs) |
|