about JFlash

From: Lilo (zheye_at_moons.com.cn)
Date: 04/30/04 

Date: Fri, 30 Apr 2004 10:39:56 +0800

¿Õ°×Hi,all:

    Form the messages shows below,what can tell me?Has one of the Flash crashed or other?
but "read Q,read R and read Y" run well.what should I do?
JFLASH Version 2.10.002 - DBPXA250
COPYRIGHT (C) 2000-2002 Intel Corporation
PXA250 revision 0x6??

attr: 00510051
There are two 16-bit Flash devices in parallel

Characteristics for one device:
 Number of blocks in device = 128
 Block size = 65536 0x10000 word(16-bit)
 Device size = 8388608 0x800000 word(16-bit)

Sample block to address list:

 Block 0 = hex address: 00000000
 Block 40 = hex address: 00A00000
 Block 80 = hex address: 01400000
 Block 120 = hex address: 01E00000
The last 66 percent of image file is all zeros
Would you like to save time by not programming that area? [y/n]:
Starting erase
Erasing block 0
Erasing done
Starting programming
Writing flash at hex address 1000, 1.56% done
Writing flash at hex address 2100, 3.22% done
Writing flash at hex address 2f80, 4.64% done
Writing flash at hex address 4080, 6.30% done
Writing flash at hex address 4f80, 7.76% done
Writing flash at hex address 5f80, 9.33% done
Writing flash at hex address 7100, 11.04% done
Writing flash at hex address 8240, 12.72% done
Writing flash at hex address 9180, 14.21% done
Writing flash at hex address a300, 15.92% done
Writing flash at hex address b440, 17.60% done
Writing flash at hex address c5c0, 19.31% done
Writing flash at hex address d740, 21.02% done
Writing flash at hex address e8c0, 22.73% done
Writing flash at hex address fa40, 24.44% done
Writing flash at hex address 10bc0, 26.15% done
Writing flash at hex address 11d80, 27.88% done
Writing flash at hex address 12f00, 29.59% done
Writing flash at hex address 14080, 31.30% done
Writing flash at hex address 15200, 33.01% done
Writing flash at hex address 16380, 34.72% done
Writing flash at hex address 17500, 36.43% done
Writing flash at hex address 18680, 38.13% done
Writing flash at hex address 19840, 39.87% done
Writing flash at hex address 1a9c0, 41.58% done
Writing flash at hex address 1bb40, 43.29% done
Writing flash at hex address 1ccc0, 45.00% done
Writing flash at hex address 1de40, 46.70% done
Writing flash at hex address 1efc0, 48.41% done
Writing flash at hex address 20140, 50.12% done
Writing flash at hex address 212c0, 51.83% done
Writing flash at hex address 22400, 53.52% done
Writing flash at hex address 23580, 55.22% done
Writing flash at hex address 24700, 56.93% done
Writing flash at hex address 25880, 58.64% done
Writing flash at hex address 26a00, 60.35% done
Writing flash at hex address 27b80, 62.06% done
Writing flash at hex address 28d00, 63.77% done
Writing flash at hex address 29e80, 65.48% done
Writing flash at hex address 2b000, 67.19% done
Writing flash at hex address 2c1c0, 68.92% done
Writing flash at hex address 2d300, 70.61% done
Writing flash at hex address 2e4c0, 72.34% done
Writing flash at hex address 2f640, 74.05% done
Writing flash at hex address 307c0, 75.76% done
Writing flash at hex address 31940, 77.47% done
Writing flash at hex address 32ac0, 79.17% done
Writing flash at hex address 33c40, 80.88% done
Writing flash at hex address 34dc0, 82.59% done
Writing flash at hex address 35f40, 84.30% done
Writing flash at hex address 37080, 85.99% done
Writing flash at hex address 38200, 87.70% done
Writing flash at hex address 39380, 89.40% done
Writing flash at hex address 3a500, 91.11% done
Writing flash at hex address 3b680, 92.82% done
Writing flash at hex address 3c7c0, 94.51% done
Writing flash at hex address 3d940, 96.22% done
Writing flash at hex address 3eac0, 97.92% done
Writing flash at hex address 3fc40, 99.63% done
Programming done
Starting Verify
verify error at address = 0 exp_dat = ea0003fe act_dat = ea003fff
verify error at address = 1 exp_dat = 0 act_dat = 3ff9
verify error at address = 2 exp_dat = 0 act_dat = 3ff9
verify error at address = 3 exp_dat = 0 act_dat = 3ff9
verify error at address = 4 exp_dat = 0 act_dat = 3ff9

¡­¡­

Relevant Pages

  • Re: about JFlash
    ... ¿Õ°×now the jflash run well,and that the hardware is good,for I have modified the source of the jflash. ... It seems that some of the bits in your low flash can not be programming properly. ... Writing flash at hex address 1000, ...
    (microsoft.public.windowsce.platbuilder)
  • Re: about JFlash
    ... ¿Õ°×It seems that some of the bits in your low flash can not be programming properly. ... Erasing block 0 ... Writing flash at hex address 1000, ...
    (microsoft.public.windowsce.platbuilder)
  • Re: cFASM (calling FASM as a C function)
    ... By that, I mean that Tomasz ... While that was an effective programming style at one ... Given how heavily string instructions ... that the DELPHI code is _MUCH_ less readable then the HEX version and with some practise much easier to write read and maintain. ...
    (alt.lang.asm)
  • Re: Pinball Machine Programming
    ... certain companies of machine choose or prefer a certain programming ... the earlier systems have a very basic OS and then the game rules are a ... assemble to native microprocessor M/L. ... this is the hex listing you refer to. ...
    (rec.games.pinball)
  • Re: Beta Readers Wanted - Visual Basic 2005
    ... > My hope is that my book will be accessible to non-programmers, ... My idea of a needed book on programming would begin with a short ... cover conversions from decimal to hex and binary, Hex arithmetic, ... obvious to the VB6 programmer what is going on. ...
    (microsoft.public.dotnet.languages.vb)