A GSM driver exposes itself as UART or USB..

From: Eshanye.K.P (esha_at_procsys.com)
Date: 04/29/04 

Date: Thu, 29 Apr 2004 12:13:22 +0530

Hi,

A GSM will be connected to UART or USB of a PDA . Now I’m going to write
a GSM driver on PCMCIA and claim the hardware resources etc, but exposes
itself as a UART or USB. PDA will
be running WinCE. Is this possible ? Any clue, hint, sample code or any
link is available where I
can get more information?

Regards
Esha

Relevant Pages

  • A GSM driver exposes itself as UART or USB..
    ... A GSM will be connected to UART or USB of a PDA. ... a GSM driver on PCMCIA and claim the hardware resources etc, ...
    (microsoft.public.windowsce.embedded)
  • ActiveSync 4.1/4.2 and WM 5.0 Cannot Sync w/USB Cable
    ... HP Ipaq RX1950 PDA w/ latest WM 5.0 ROM ... Adding Activesync processes to Windows Firewall exceptions. ... Two different USB cables. ... the connection type of the PDA either as a RNDIS Sync Mode or USB Serial ...
    (microsoft.public.pocketpc.activesync)
  • Re: ActiveSync not working with X51V
    ... It could be a hardware problem with the usb cradle. ... I connected my PDA to my laptop through the USB and same results as my ... First insert the Pocket PC in the cradle and check on the Device Manager ... After a massive IR synchronization (Contacts and ...
    (microsoft.public.pocketpc.activesync)
  • Re: AT91SAM7S256-128-64-321 USB and USART usage (clocking)
    ... UART peripheral on the AT91SAM7S256-128-64-321, ... have the main clock MCK from an external crystal. ... MCK derived directly, I mean, does MCK have the same frequency as the ... USB needs a couple of clocks: clock from the PLL at 48MHz ...
    (comp.arch.embedded)
  • ActiveSync nightmare
    ... The PDA connects via USB to a Windows XP home PC. ... Then try connecting ...
    (microsoft.public.pocketpc.activesync)