RE: Accelent USB drivers; modify and compile for iPaq 4155

From: Robert Magyar (anonymous_at_discussions.microsoft.com)
Date: 04/28/04 

Date: Tue, 27 Apr 2004 17:36:03 -0700

Alex,

While the USB goal is to easly connect devices, USB devices require a fair amount of design and software to work.

You should review the ARCHITECTURAL OVERVIEW chapter and USB DATA FLOW MODEL chapter in the USB 1.1 Spec so you plan out your design. The USB spec is online at:
http://www.usb.org/developers/docs/

Robert

Relevant Pages

  • RE: Controlling specific USB devices on Windows XP
    ... Controlling specific USB devices on Windows XP ...
    (Focus-Microsoft)
  • Re: Why do not CRT/LCD monitors come with USB?
    ... Existing ones like USB, Firewire, and SATA, ... given the slow 1.0 and 1.1 speeds. ... | re-written at the same the EHCI driver was added. ... |> USB device addressing is flaky in design. ...
    (comp.os.linux.hardware)
  • Re: USB or Ethernet for controller interface?
    ... does this make USB the obvious winner? ... Ethernet or USB data rate is needed because the ... design will be transferring large amounts of buffered data. ... Not for time or safety critical control. ...
    (comp.arch.embedded)
  • RE: USB Device Not Recognized - If u can solve this one, you are truly
    ... I have a computer that gives the following error when I plug in some USB ... Windows does not recognize it. ... |- Unused Port ... I've removed all USB devices from device ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: USB as product-internal interconnect system?
    ... > I'm designing a product that includes a number of interchangable boards ... > more powerful main board (basically the reference design of a PDA). ... > and a way for devices to announce their type and capabilities. ... > worked on the design I started to realize I was reinventing USB. ...
    (sci.electronics.design)