Re: Enabling KITL over USB

From: elley (elleyza_at_hotmail.com)
Date: 03/26/04 

Date: 25 Mar 2004 20:05:44 -0800

"Steve Maillet \(eMVP\)" <nospam1@EntelechyConsulting.com> wrote in message news:<uid53frEEHA.4080@TK2MSFTNGP09.phx.gbl>...
> What hardware? Generally it's anything but straight forward unless the BSP
> for the platform already has that support.

Hmmm, actually, I've just been told that it would be good to implement
USB over KITL for our old HW (using the Strong Arm SA1110) too... We
had made the necessary changes to halkitl.c, halether.c,
halkitlether.c, smc.c for KITL over Ethernet. I suppose we'll have to
implement some changes to halkitlserial.c among other things. Any
thoughts on what these "other things" will be? Thanks in advance.

Relevant Pages

  • Re: Release Build running on hard disk
    ... note that the ability to access the release directory across the kitl ... you also include CE target control support (also known as relfsd, ... any way you can access the hard disk (boot from floppy with network ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Problem with kernel debugger and interrupts
    ... I think KITL is not the cause. ... try to remove kernel debugger ... support in Your platform settings and try again ...
    (microsoft.public.windowsce.platbuilder)
  • Re: USB Kitl
    ... In Windows CE 5.0 only download over USB was supported in mainstone, *not* KITL. ... These few lines indicate that KITL across USB should already be available on the MAINSTONEIII Platform. ... You have to modify your bootloader to download the image and your kernel to support the kernel. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Exception After Enabling Device Interrupts On CEPC
    ... believe the implementations that come from Microsoft support a shared kitl ... implementations, the standard answer is that it's not supported. ... interrupt on the device that is being used for kitl must be completely ...
    (microsoft.public.windowsce.platbuilder)