Re: Enabling KITL over USB

From: elley (elleyza_at_hotmail.com)
Date: 03/26/04 

Date: 25 Mar 2004 19:54:29 -0800

"Steve Maillet \(eMVP\)" <nospam1@EntelechyConsulting.com> wrote in message news:<uid53frEEHA.4080@TK2MSFTNGP09.phx.gbl>...
> What hardware? Generally it's anything but straight forward unless the BSP
> for the platform already has that support.

Hi Steve,

We'll be using the new Bulverde processor from Intel, however, we
haven't yet received the evaluation board/any hardware or the
development kit which basically means that we can't start coding
anything yet. The KITL over Ethernet was implemented for the SA1110 on
our previous hardware and we downloaded the image + debugged using PB
4.2. This version will be based on PPC 2003 with a brand new HW so I
expect most of the code will have to be written again from scratch. As
our devices don't necessarily have an Ethernet chip, we've decided it
would make our life easier if we could just plug in the USB cable and
have all the debugging info this way.

At the moment, I'm just trying to assess how much work the KITL over
USB functionality will be and get an idea of what will need to be
done. SOrry, it's very vague but we don't have much info at this
stage.

Relevant Pages

  • Re: KITL and PCI Interrupts
    ... KITL over what transport medium? ... Ethernet, serial, or USB? ... The KITL interface is usually tied in very closely with the hardware, ... interrupt chain. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: KITL during OEMPowerOff
    ... KITL are already taken care of by the MS code but they don't know how to ... restore the device hardware into the state it was in before the power down. ... smaillet at EmbeddedFusion dot com ...
    (microsoft.public.windowsce.embedded)
  • Re: KITL during OEMPowerOff
    ... Steve Maillet wrote: ... When you return from OEMPowerOff the KITL ... > hardware MUST be restored to the working state it was in at entry to ...
    (microsoft.public.windowsce.embedded)