RE: connecting platform builder to ARM 9 board using KITL serial transport
From: paul_chao (anonymous_at_discussions.microsoft.com)
Date: 03/03/04
- Next message: paul_chao: "RE: does wince.net support ARM9?"
- Previous message: Jacky J. Chen: "How to customize the user interface ?"
- Messages sorted by: [ date ] [ thread ]
Date: Wed, 3 Mar 2004 00:16:05 -0800
Hi Maria,
You can add the codes in function OEMKitlInit() to replace function call InitEther()
if (!InitSerial(pKitl)) {
KITLOutputDebugString("Unable to initialize KITL Transports!\n");
return FALSE;
}
About how to implete function InitSerial(), please reference %_WINCEROOT%\platform\CEPC\kernel\hal\halserkitl.c.
I have tested it on Windows CE.NET 4.2 for Motorola MC9328MX1 reference board.
Regards,
Paul, Chao
@ Techware
----- Maria wrote: -----
Hi all,
I am porting windows CE 4.1 to ARM 9 custom board. I am in the process of
implementing the OAL layer, and the kernel boots up, calls OEMinit, and
finally calls OEMidle (if KITL routines are not invoked)
Now I wish to bring up a shell and KITL support, as documented in
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcedsn40/html/cghowhowtodevelopoal.asp.
I have implemented the required KITL OAL routines. The connection between
the host computer and the target board (excalibus) is over serial port.
When I run the KITL enabled kernel, and try to connect to platform
builder, the responses at the Platform builder and the target side are as
given below.
Platform builder - Kernel debugger is waiting to connect with target.
Target kernel is looping at the connectTodesktop routine (which is called
in continuation with OEMKitlinit).
Can any one please advice me on how to bring up the connection between
platform builder and the target device over a Serial KITL connection. I am
not using platform builder to download the kernel or to build the kernel.
I built the kernel using command line tools and use a flash utility to
download the kernel to the flash of the target board.
Thanks in advance,
Mariam.
- Next message: paul_chao: "RE: does wince.net support ARM9?"
- Previous message: Jacky J. Chen: "How to customize the user interface ?"
- Messages sorted by: [ date ] [ thread ]
Relevant Pages
|
