Re: IDE driver program

From: Oliver Münchow (omuenchow_at_NOSPAMgesytecDOT.de)
Date: 02/27/04 

Date: Fri, 27 Feb 2004 13:18:10 +0100

Hi Weijie Zhu,

you should try these additional settings

; HIVE BOOT SECTION
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\UTLDRV]
   "Flags"=dword:1000

[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile]
   "MountFlags"=dword:2

[HKEY_LOCAL_MACHINE\init\BootVars]
   "SYSTEMHIVE"="Registry\\system.hv"
   "PROFILEDIR"="Registry"
   "Start DevMgr"=dword:1
; END HIVE BOOT SECTION

To get extended informations from your machine you should add debug versions
of FileSys.exe and your device driver and enable all debug zones of them.

Best regards,
Oliver Münchow 

-- 
---------------------------------------
Gesytec GmbH    eMail:
52076 Aachen    omuenchowATgesytecDOTde
http://www.gesytec.de
"Weijie Zhu" <zwj196801@163.net> schrieb im Newsbeitrag
news:ABFEA6B2-E42A-4C25-89DB-907ABC0BFDA7@microsoft.com...
> Hi Oliver,
>
>     Here is my  platform.reg, could you help me?
>
> [HKEY_LOCAL_MACHINE\Platform]
>    "Name"=LOC_PLATFORMNAME
>    "Type"=dword:2
>
> ; HIVE BOOT SECTION
> ; The UTL driver must be at the beginning of the registry since we
> ; need it to be loaded as the very first driver
> [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\UTLDRV]
>     "Prefix"="UTL"
>     "Dll"="UTLDRV.DLL"
>     "Order"=dword:0
>     "Index"=dword:0
>     "FriendlyName"="Utility Driver"
> ; "Flags"=dword:1000  <== this will hinder utldrv from being loaded
> ; END HIVE BOOT SECTION
>
> ; This registry setting controls the checkboxes dsiplayed in the Sounds
CPL
> ; under "enable clicks & taps". Set bit0 if you have a keyboard, set bit1
if
> ; you have a touch screen. Set bit2 if you have HW buttons (NOTE: for now
> ; HW buttons are mutually exclusive with the keyboard)
> ; For ODO setting it to 3=keybd, and touch screen
> [HKEY_LOCAL_MACHINE\ControlPanel]
> "InputConfig"=dword:2
>
> ; Odo touch hardware is marginal.  Allow large error since touch hardware
is noisy
> [HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
>    "MaxCalError"=dword:7
> ;  this is for AT9X0 touch panel
> ; portrait
> IF BSP_TOUCH_UCB1300
>    "CalibrationData"="488,486 738,239 234,240 236,730 739,727 "
> ENDIF
> IF BSP_TOUCH_WM9712
>    "CalibrationData"="503,508 758,243 250,248 249,772 755,768 "
> ENDIF
>
> ;Storage manager
> [HKEY_LOCAL_MACHINE\System\StorageManager]
> "Dll"="fsdmgr.dll"
>
> ;File System driver
> [HKEY_LOCAL_MACHINE\System\StorageManager\AutoLoad\Relfsd]
> "Dll"="relfsd.dll"
> "Paging"=dword:0
>
> [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles]
> "AutoMount"=dword:1
> "AutoPart"=dword:0
> "AutoFormat"=dword:0
> "MountFlags"=dword:0
> "DefaultFileSystem"="FATFS"
> "PartitionDriver"="mspart.dll"
> "Folder"="Mounted Volume"
>
> [HKEY_LOCAL_MACHINE\System\StorageManager\FATFS]
>     "FriendlyName"="FAT FileSystem"
>     "Dll"="fatfsd.dll"
>     "Flags"=dword:00000024
>     "Paging"=dword:1
>     "CacheSize"=dword:ffffffff
>
> ; Resources available at time of device.exe initialization.
> ; Key names are descriptive; resource ids are definitive.
> ; System ids are defined in ddk\inc\resmgr.h.
> [HKEY_LOCAL_MACHINE\Drivers\Resources\IRQ]
>    "Identifier"=dword:1
>    "Minimum"=dword:1
>    "Space"=dword:20
>    "Ranges"="1-0x20"
>    "Flags"=dword:1000
> ;  "Shared"=""
>
> [HKEY_LOCAL_MACHINE\Drivers\Resources\IO]
>    "Identifier"=dword:2
>    "Minimum"=dword:0
>    "Space"=dword:10000
>    "Ranges"="0-0xFFFF"
>    "Flags"=dword:1000
>
> ;[HKEY_LOCAL_MACHINE\System\GDI\Drivers]
> ;    "Display"="ddi.dll"
> [HKEY_LOCAL_MACHINE\Drivers\Display\AT_LCD1]
> ; 320x240 LCD Landscape 16Bpp
> ; Portrait Display 240x320
> ;   "CxScreen"=dword:78
> ;   "CyScreen"=dword:A0
> ;   "CyScreen"=dword:140
> ; Landscape Display 320x240
>    "CxScreen"=dword:F0
>    "CyScreen"=dword:140
>    "Bpp"=dword:8
>    "VGA"=dword:0
>    "NTSC"=dword:0
>    "LCD"=dword:1
>    "IClass"="{EB91C7C9-8BF6-4a2d-9AB8-69724EED97D1}"
> ;; MQSW - MEDIAQ Registry Addition
> [HKEY_LOCAL_MACHINE\Drivers\display\mq120]
>    "Rotate"=dword:1
>    "Ge_On"=dword:1
> ;ENDIF
>
> [HKEY_LOCAL_MACHINE\Drivers\PCMCIA]
>
"StatusChangeActivityEvent"="PowerManager/ActivityTimer/SystemActivity"
>
> [HKEY_LOCAL_MACHINE\SYSTEM\GWE]
>     "ActivityEvent"="PowerManager/ActivityTimer/UserActivity"
>
> [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power]
>     "DisableGwesPowerOff"=dword:1
>
>
> [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power]
> "SystemIdleTimerResetEvent"="PowerManager/SystemIdleTimerReset"
>
> IF IMGNOKITL
> IF BSP_BUILDIN_NE2000
>
> [HKEY_LOCAL_MACHINE\Comm\NE20001\Parms]
>    "BusType"=dword:0
>
>    "InterruptNumber"=dword:19
>    "IoBaseAddress"=dword:a4000000
>    "SysIntr"=dword:19
>
> ENDIF
> ENDIF
>
>
;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
> IF BSP_NOAUDIO !
>
;+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
+
> [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WaveDev\]
>    "Prefix"="WAV"
>    "Dll"="wavedev.dll"
>    "Index"=dword:1
>    "Order"=dword:1
>    "Priority256"=dword:40
>
> [HKEY_LOCAL_MACHINE\Audio\SoftwareMixer]
> IF BSP_AUDIO_UCB1300 !
>   "SampleRate"=dword:AC44
> ENDIF
> IF BSP_AUDIO_UCB1300
>   "SampleRate"=dword:2B11
> ENDIF
>   "Buffers"=dword:4
>   "BufferSize"=dword:800
>   "EnableLowPassFilter"=dword:1
> ;  "Priority 256"=dword:32
>   "Priority 256"=dword:dc
>
;---------------------------------------------------------------------------
-
> ENDIF
>
;---------------------------------------------------------------------------
-
>
> IF BSP_NOWAVCLICK !
> [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\WAPIMAN\Clicks]
> "ClickDLL"="WavClick.dll"
> "KeyLoud"=dword:64
> "KeySoft"=dword:65
> "TouchLoud"=dword:66
> "TouchSoft"=dword:67
> ENDIF
>
> IF BSP_NOSERIAL !
> IF BSP_USERADIO !
> [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial]
>    "Dll"="AtlasSer.Dll"
>    "SysIntr"=dword:12
>    "IoBase"=dword:AB000000
>    "Tsp"="Unimodem.dll"
>    "DeviceArrayIndex"=dword:0
>    "Prefix"="COM"
>    "Order"=dword:1
>    "Index"=dword:1
>    "FullRS232"=dword:1 ;Serial 0 have a full RS232 support
>    "FriendlyName"="Serial Cable on USP0 Atlas Debugging Board"
>    "Priority256"=dword:41
> ENDIF
>
> IF BSP_SERIAL_2
> [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Serial2]
>    "Dll"="AtlasSer.Dll"
>    "SysIntr"=dword:1e
>    "IoBase"=dword:AB010000
>    "Tsp"="Unimodem.dll"
>    "DeviceArrayIndex"=dword:1
>    "Prefix"="COM"
>    "Order"=dword:1
>    "Index"=dword:2
>    "FullRS232"=dword:0 ;Serial 1 does have a full RS232 support with GPIOs
>    "FriendlyName"="Serial Cable on USP1 Atlas Debugging Board"
> ENDIF
>
> IF BSP_NOIRDA !
>
> [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\IrDA]
>    "Dll"="AtlasSer.Dll"
>    "SysIntr"=dword:18
>    "IoBase"=dword:AB040000
>    "Tsp"="Unimodem.dll"
>    "DeviceArrayIndex"=dword:2
>    "Prefix"="COM"
>    "DeviceType"=dword:2
>    "Order"=dword:1
>    "Index"=dword:3 ;Assign COM4 for IrDA raw if =4 error
>    "FullRS232"=dword:0 ;
>    "FriendlyName"="Raw IR on USP2"
>
> IF IMGNOSIR !
> [HKEY_LOCAL_MACHINE\Comm\IrDA\Linkage]
>     "Bind"=multi_sz:"Irsir1"
>
> [HKEY_LOCAL_MACHINE\Comm\Irsir]
>    "DisplayName"=LOC_DISPLAYNAME_COMM_IRSIR
>    "Group"="NDIS"
>    "ImagePath"="irsir.dll"
>
> [HKEY_LOCAL_MACHINE\Comm\Irsir\Linkage]
>    "Route"=multi_sz:"Irsir1"
>
> [HKEY_LOCAL_MACHINE\Comm\Irsir1\Parms]
>    "BusNumber"=dword:0
>    "BusType"=dword:0
>    "Port"=dword:3
>    ; 0 = Use external dongle, 1 = Use internal IR
>    "IntIR"=dword:1
>    ; 0 = Internal transceiver, 1 = Extended Systems JetEye dongle
>    "TransceiverType"=dword:0
> ENDIF
> ENDIF
>
> [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\IrCOMM]
>    "Dll"="IRCOMM.DLL"
>    "Prefix"="COM"
>    "Order"=dword:2
>    "Index"=dword:4
>
> ENDIF
>
> IF BSP_NOATAPIDISK !
> [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\AtapiDisk\]
>    "Prefix"="IDE"
>    "Dll"="atlas_atapi"
>    "Order"=dword:3
>    "Class"=dword:01
>    "SubClass"=dword:01
>    "IClass"=multi_sz:"{CDDC3621-3512-4b3f-BB6F-B4DD5E061795}"
>
> [HKEY_LOCAL_MACHINE\Drivers\BuiltIn\AtapiDisk\Device0]
>    "Prefix"="DSK"
>    "Dll"="atlas_atapi"
>    "Settings"=dword:B
>    "DeviceId"=dword:0
>    "Ioctl"=dword:4
>    "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"
> ; Uncomment the following lines if you want to enable slave device.
>
> ;[HKEY_LOCAL_MACHINE\Drivers\DeferLoad\AtapiDisk\Device1]
> ;   "Prefix"="DSK"
> ;   "Dll"="atlas_atapi"
> ;   "Settings"=dword:B
> ;   "DeviceId"=dword:1
> ;   "Ioctl"=dword:4
> ;   "IClass"=multi_sz:"{A4E7EDDA-E575-4252-9D6B-4195D48BB865}"
>
> [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile]
>     "Name"="IDE Hard Disk Drive"
>     "Folder"=LOC_STORE_HD_FOLDER
>
> [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\HDProfile\FATFS]
>     "EnableCacheWarm"=dword:0
>
> [HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\CDProfile]
>     "Name"="IDE CDROM/DVD Drive"
>     "Folder"=LOC_STORE_CD_FOLDER
>     "DefaultFileSystem"="UDFS"
>     "PartitionDriver"=""
>
>
[HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\CDProfile\PartitionTable]
>
> ENDIF
>
> Regards
> -Weijie