Re: Problems on ActiveSync on CE4.2 using UART

From: LL (lilian_at_nospam.bokia.net)
Date: 02/27/04 

Date: Fri, 27 Feb 2004 17:12:16 +0800

Thanks Valter. I will try what is the debug output on this.

Now I am able to get the ActiveSync to get connected whereby at MS
ActiveSync 3.7.1 is at "Connected" stage (The green round icon stops
rotating). At the device side, ActiveSync is at "Connected" stage as well.
After waiting for a very long time, I sometimes can get "Partnerships" and
sometimes fail to connect at all - "Fail partnerships" (The icon becomes
gray).

When I get the "Partnership" (which takes a very long time), I fail to enter
"Explore" in the device. MS ActiveSync seems to hanged. What is the cause
that the device fail to be "Explore"?

To me, it seems that both PC and device are not synchronized well. Can
anyone tell me, how to synchronize better? Or is it not the synchronizing
matter but other matters?

Thanks

Regards,
Lilian

"Valter Minute" <vminute@REMOVEMEinwind.it> wrote in message
news:Xns949C62B512DDAVALTERMINUTE@207.46.248.16...
> "LL" <lilian@nospam.bokia.net> wrote in
> news:e5SRLRN$DHA.2800@tk2msftngp13.phx.gbl:
>
> > Hi,
> >
> > I read from the newsgroup, and I found out that some could
> > implement ActiveSync by shorting pin 1-4-6 and connecting RX, TX,
> > CTS, RTS to both ends. I have did this, and could get the both
> > CLIENT and CLIENTSERVER (please refer to my previous posting).
> > After CLIENTSERVER, I get strange characters reading/writing from
> > the PC to the device and vice versa. Can I know what are these
> > characters ~.}#.!}"} } }.}"}&} } } } }'}"}(}"..~ .... ?
> [...]
> > Can anyone tell was is going wrong?
>
> Try to enable the ActiveSync (and unimodem) related debug zones (see
> registry entries at the end of message, I took them from one of my old
> projects, so it could contain wrong entries...) and check the debug
> output.
>
> [HKEY_LOCAL_MACHINE\DebugZones]
> "RLOG"=dword:ffff
> "repllog"=dword:ffff
> "rnaapp"=dword:ffff
> "Repllog.exe - Change Log Agent"=dword:ffff
> "Unimodem"=dword:ffff
>
>
> --
> Valter Minute
> vminute@inwind.it (the reply address of this message is invalid)

Relevant Pages

  • Re: RAPI problems
    ... Jon Skeet [C# MVP] wrote: ... Unless ActiveSync ... >> fail. ...
    (microsoft.public.dotnet.framework.compactframework)
  • Re: ActiveSync [Guest only] problem on Windows Mobile 5
    ... ActiveSync to connect to TCP/IP? ... > USB and Serial connection I end up with the same problem. ... > description of my problem along with some serial debug output. ...
    (microsoft.public.pocketpc.activesync)
  • Re: ActiveSync...is it installed or not?
    ... the RAPI stuff will likely fail as well (that ... that means ActiveSync will be triggered when cradled. ... >> the CeUtil DLL to access the ActiveSync registry entries. ... We are trying to use RAPI to develop a routine ...
    (microsoft.public.dotnet.framework.compactframework)
  • ActiveSync CRC error
    ... I have a problem connecting with ActiveSync in WinCE 5.0. ... But I can't get the device to connect from COM3 and COM4. ... >From the debug output, I get a CRC error from the Activesync process. ...
    (microsoft.public.windowsce.embedded)