Re: Problems on ActiveSync on CE4.2 using UART

From: LL (lilian_at_nospam.bokia.net)
Date: 02/27/04 

Date: Fri, 27 Feb 2004 09:51:44 +0800

Hi,

I read from the newsgroup, and I found out that some could implement
ActiveSync by shorting pin 1-4-6 and connecting RX, TX, CTS, RTS to both
ends. I have did this, and could get the both CLIENT and CLIENTSERVER
(please refer to my previous posting). After CLIENTSERVER, I get strange
characters reading/writing from the PC to the device and vice versa. Can I
know what are these characters ~.}#.!}"} } }.}"}&} } } } }'}"}(}"..~ .... ?

At the device side, I could get until the message "User Authenticated".
After that, the ActiveSync message box disappears and never being connected.

I don't understand why ActiveSync did not continue connecting after
CLIENTSERVER and strings of ~.}#.!}"} } }.}"}&} } } } }'}"}(}"..~ ....
characters are being sent.

Can anyone tell was is going wrong?

Thank You

Regards,
Lilian

"Valter Minute" <vminute@REMOVEMEinwind.it> wrote in message
news:Xns949B80ADCCB0AVALTERMINUTE@207.46.248.16...
> "LL" <lilian@nospam.bokia.net> wrote in
> news:e4Zjc2D$DHA.268@TK2MSFTNGP10.phx.gbl:
>
> > Hi,
> >
> > I have problems implementing ActiceSync on WinCE 4.2. I am
> > implementing on PXA263. I am implementing ActiveSync on serial
> > connection via BTUART. On the PC side, I am using ActiveSync 3.7.1
> >
>
> ActiveSync needs a full UART and the BTUART on PXA (PXA255, at least)
> does not implement all RS232 control signals. ActiveSync works on the
> FFUART of PXA255.
>
>
> --
> Valter Minute
> vminute@inwind.it (the reply address of this message is invalid)

Relevant Pages

  • Re: ActiveSync 4.1 USB Forever Connecting Problem Fixed - Cisco VPN Co
    ... The whole purpose of a firewall is to ... prevent things from happening like external devices connecting to network ... Previously I had ActiveSync 3.8 ...
    (microsoft.public.pocketpc.activesync)
  • Re: Get Connected Crashes Computer
    ... I have seen this on 3 different Win2000 machines ... We are connecting HHP Dolphin 9500s to the PCs. ... > IPAQ 3670 and Activesync 3.71 and a USB connection. ... >>that error message is very useful. ...
    (microsoft.public.pocketpc.activesync)
  • Re: Get Connected Crashes Computer
    ... I have seen this on 3 different Win2000 machines ... We are connecting HHP Dolphin 9500s to the PCs. ... > IPAQ 3670 and Activesync 3.71 and a USB connection. ... >>that error message is very useful. ...
    (microsoft.public.pocketpc.activesync)
  • Re: Trying to connect with HP IPAQ hx2795
    ... exclude, rather than include, ports. ... > Did you allow all ActiveSync components to bypass the firewall? ... When you install ActiveSync 4.0 on Windows XP, ... >> tried connecting again - still seems to hang on the Connecting state. ...
    (microsoft.public.pocketpc.activesync)
  • Re: Activesync no longer works
    ... I place device in craddle 5-10 minute after boot. ... For a long time a have been PDA togther with my PC at work and Activesync ... started and showed "connecting". ...
    (microsoft.public.pocketpc)