ATA Driver in Windows CE.NET

From: Purohit (anonymous_at_discussions.microsoft.com)
Date: 02/26/04 

Date: Thu, 26 Feb 2004 11:57:18 -0800

Hi ,
  My flash card has the ATA/TRUE IDE support , it has a
IDE port . But WinCE.NET has ATAPI IDE driver but the same
is not working for this flash card . Any suggestion

Regards
Purohit.

Relevant Pages

  • Re: not enough IDE port for 3 device
    ... My Dell desktop already has a SATA hard ... can I use an IDE hard drive together with a SATA hard drive all ... DVD drives? ... IDE port can only connect up to 2 devices, ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: XP-Startprobleme
    ... IDE Port laufen hast und somit die zweite als Slave laeuft. ... HDD starte bleibt der ...
    (microsoft.public.de.german.windowsxp.hardware)
  • Re: ide disk not found on SATA port
    ... We've only now discovered that the board had 1 IDE port and he only ... So, he bought a IDE ... Although - to be truthful - if the motherboard is not recognizing the ...
    (microsoft.public.windowsxp.help_and_support)
  • not enough IDE port for 3 device
    ... I just bought a Seagate IDE 400G hard drive and wanted to use ... DVD drives? ... IDE port can only connect up to 2 devices, ...
    (comp.sys.ibm.pc.hardware.storage)
  • Re: IDE drive doesnt work in system with SATA drive
    ... I have the DVD drive as primary master and the IDE hard drive as secondary master. ... So it appears there's something flaky with the secondary IDE port except that I had previously successfully formated the drive booting off the Western Digital utility floppy. ...
    (alt.comp.periphs.mainboard.asus)