Nand flash port and cloning public common code

From: sc (shui_at_no.com)
Date: 02/25/04

  • Next message: Steve Maillet \(eMVP\): "Re: Nand flash port and cloning public common code" 
    Date: Wed, 25 Feb 2004 18:24:46 -0500

    I'm little confused whether I need to follow Steve Maillet's article on
    cloning public common code
    The Nand Flash sample(ce4.2) doesn't have TARGETLIBS/SOURCELIBS in the
    SOURCES
    file, so I can't do step #11:

    11. Edit the Com16550\src\sources file. Remove the TARGETLIBS (or
    SOURCELIBS) entry for Com16550_lib.lib and move it to SOURCELIBS, changing
    the path as appropriate. You may need to replace $(_PUBLICROOT)\common\oak
    with $(_TARGETPLATROOT).

    So, this nand flash driver isn't link with other libs and so there is no
    reason to do those sysgen_capture, ...

    I should be able to just copy those source,include files to my drivers/...
    dir and build it.

    I don't have the hardware for this yet, so I can't test the driver but like
    to be prepared now.

    What am I missing?

  • Next message: Steve Maillet \(eMVP\): "Re: Nand flash port and cloning public common code"

    Relevant Pages

    • Re: Nand Flash Driver in Wince 6.0
      ... it is taking 25-30 Sec during the loading of Nand Flash driver. ... I am using 256MB Nand flash in my device.My device is running using pxa27x processor.I have written the FMD driver in WINCE 6.0 for it. ...
      (microsoft.public.windowsce.embedded)
    • problem , add two fat fsd driver for different sector sizes
      ... I have modified the sample NAND flash driver. ... Number of path cache entries = 50 ... InitVolume: invalid BPB, volume deemed invalid 0x8fc78be0: No cache has ...
      (microsoft.public.windowsce.platbuilder)
    • NAND Flash driver source code
      ... I am looking for NAND Flash driver for a ST's NAND Flash chip on ARM ... the source code is of the driver ... I am using Windows CE 5.0 and I ...
      (microsoft.public.windowsce.platbuilder)