Re: Connecting to a Local Image

From: Oliver Münchow (omuenchow_at_NOSPAMgesytecDOT.de)
Date: 02/12/04 

Date: Thu, 12 Feb 2004 15:16:00 +0100

Hi John,

these thinks had been discussed a lot of time in this newsgroup, so try a
search with google in groups *windowsce*.

So just a short description what you have to do:
Add network adapter to your device which will be supported by Windows CE
(e.g. NE2000 compatible)
To get all informations from your device your image must be a debug image
with options KITL, CE Target Control and Kernel Debug in Platform -
Settings - Build Options.
Also your image has to include Platform Manager Base Engine and Transports
TCP/IP and KITL (all from catalog).
Make settings for your ethernet adapter in autoexec.bat of your bootdisk
(IOBase, IRQ, IP)
Start your device with bootdisk and select eboot.bin startup.
Go in Platform Builder Workspace to Target - Configure Remote Connection.
Set Download and Transport to Ethernet and click ethernet.
Wait till an entry magically appears in the box (about 30 - 60 seconds after
booting your CE device)
Select it and click OK and OK again (parent window).
Select Target - Download / Initialize and your image will be send to your
device.
Select a remote tool you want and click Cancel (first we have to configure
remote connection).
Select Connection - Configure.
Select Device and Properties.
Set Transport to KITL and startup to CESH
Close all dialogs with OK (ignore the test).
Select Connection - Connect and select your device.
Happy connection!!

Best regards,
Oliver Münchow 

-- 
---------------------------------------
Gesytec GmbH    eMail:
52076 Aachen    omuenchowATgesytecDOTde
http://www.gesytec.de
"John Flynn" <anonymous@discussions.microsoft.com> schrieb im Newsbeitrag
news:2B77DA04-E3E2-4A84-A6A6-165E045A0C3A@microsoft.com...
> Can anyone please help me with this one.
>
> Thanks,
> J

Relevant Pages

  • Re: platform builder 4.2 debugger cannot connect to target
    ... Kernel Transport to Serial, ... to init KITL for Ethernet, not serial as it's doing now. ... I captured the serial port output during the download and boot up. ... Debugger could not initialize connection. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: ethernet connection wont work
    ... the Westell "DSL modem" (which actually includes a router) is configured. ... The Westell has a single Ethernet connector but the Linksys probably has ... Area Connection." ...
    (microsoft.public.windowsxp.network_web)
  • Re: Connecting Mac to Telewest cable modem?
    ... yesterday so time is running out) and she's agreed to try a Mac. ... Make sure you either use Ethernet from ... the cable modem to the Mac, or Ethernet from the cable modem to a router and ... This is a very poor implementation of a Cable connection. ...
    (uk.comp.sys.mac)
  • Re: [opensuse] How to set up the wireless connection for TeleCom router
    ... 1- The connector on the Aladino phone is a Ethernet plug, ... The base of Aladino phone is provided with: ... This kind of connection is used to operate Aladino as a regular analogic phone ... TeleCom Gate 2 has a port named ADSL which is actually a phone-out plug. ...
    (SuSE)
  • Re: ActiveSync/Ethernet/CE6
    ... I've got a device connected directly to a LAN via ethernet, ... ActiveSync, or if the application development computer doesn't have ... You then have a minute or two to make the connection to ... ActiveSync should I be installing? ...
    (microsoft.public.windowsce.embedded)