System hangs on suspend/resume

From: Frank D Lombardo (Frank_at_NoSpam.com)
Date: 02/06/04 

Date: Fri, 6 Feb 2004 16:38:11 -0500

I am trying to configure Power Management on my Au1100 based board with
CE.NET. If I Start|Suspend then try to resume with an interrupt, the system
hangs. I'm not sure how to interpret the debug output. Here is a copy, can
anybody point me in the right direction?

  244312 PID:20b2292 TID:e1eeef92 Back from OEMPowerOff
 244316 PID:20b2292 TID:e1eeef92 We have the 32kHz oscillator, start it if
it is not already running
 244174 PID:20b2292 TID:e1eeef92 Using RTCTICK tick source
 244175 PID:20b2292 TID:e1eeef92 Calling device manager power proc.
 244176 PID:20b2292 TID:e1eeef92 Calling GWES power proc.
 244176 PID:a1f67af2 TID:e1eeef92 Returning to normally scheduled
programming.
 244177 PID:a1f67af2 TID:e1eeef92 Setting Event 420ac8ca, phd = 820ac8c8
 244177 PID:a1f67af2 TID:e1eeef92 Setting Event 420acdc2, phd = 820acdc0
 244178 PID:a1f67af2 TID:e1eeef92 Setting Event a2053f92, phd = 82053f90
 244178 PID:a1f67af2 TID:e1eeef92 Returning from PowerOnSetEvents.
 244180 PID:20b2292 TID:420a7862 0x820a8400: OEMIocontrol:: Code=0x10100a8
 244180 PID:20b2292 TID:420a7862 0x820a8400: DeviceType: 0x101
 244180 PID:20b2292 TID:420a7862 0x820a8400: Access: 0x0
 244180 PID:20b2292 TID:420a7862 0x820a8400: Function: 0x2a
 244180 PID:20b2292 TID:420a7862 0x820a8400: Method: 0x0
 244180 PID:20b2292 TID:420a7862 0x820a8400: OEMIoControl: Unknown
IoControlCode 0x10100a8.
 244181 PID:20b2292 TID:c1ff9fba 0x81ff5000: SerialDllEntry
 244181 PID:20b2292 TID:41e9cdfa 0x81f739a0: SerialDllEntry
 244181 PID:20b2292 TID:41e9cdfa 0x81f739a0: +CHub(Root tier
0)::HandleDetach
 244221 PID:20b2292 TID:c20365ea 0x81f608b8: SerialDllEntry
 244223 PID:20b2292 TID:81ff5fda 0x81ff2000: SerialDllEntry
 244225 PID:20b2292 TID:41e9cdfa 0x81f739a0: CHub(Root tier
0)::HandleDetach - status change thread closed in 3 ms
 244227 PID:20b2292 TID:41e9cdfa 0x81f739a0: +CFunction(tier
1)::HandleDetach
 244224 PID:20b2292 TID:c20365ea Ndisuio:
 244229 PID:20b2292 TID:c20365ea Status: Open 0005F930 in power state 4,
Status 40010004 ignored
 244231 PID:20b2292 TID:c20365ea Ndisuio:
 244231 PID:20b2292 TID:c20365ea Status: Open 0005F930 in power state 4,
Status 40010005 ignored
 244232 PID:20b2292 TID:c20365ea 0x81f608b8: ndisMResetCompleteStage2:
Internal reset
 244239 PID:20b2292 TID:41e9cdfa 0x81f739a0:
!CQueuedPipe(Control)::ClosePipe 002c5420 doesn't exist!

Thanks, 

-- 
Frank D. Lombardo
Turning Point Technology, Inc.
Frank_AT_TurningPointOnline_DOT_com

Relevant Pages

  • Re: [linux-pm] [patch] pm: fix runtime powermanagements /sys interface
    ... some drivers will want to fix up those values so that it can ... the vast and often fundamentally different power ... power management states and capabilities is a sensible option. ... want to provide userspace control of these low-level details. ...
    (Linux-Kernel)
  • Re: Power management tabs missing!
    ... > Why would the keyboard and mouse have Power Management tabs? ... such as network adapters. ... > [[Specifies the operating system to come out of a low power state to ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: OID_PNP_ENABLE_WAKE_UP not being set before OID_PNP_SET_POWER
    ... Well, to begin with, ndisuio is not a supported way to talk to ndis drivers ... tampering with power OIDs can lead to random results. ... state change wakeup is not supported). ...
    (microsoft.public.development.device.drivers)
  • Re: OT: Suggestions?
    ... Here is how it is setup currently. ... anything in the Power Management screen. ... "Freedom, true freedom, is nothing more than intellectual advantage over others." ...
    (alt.2600)
  • Re: Power Management in Platform Builder 5.0
    ... Is it possible to copy standard shell to custom directory and compile this ... Will it compile or still have dependency on full power management? ... We observe following effect in our GUI application with and without Power ...
    (microsoft.public.windowsce.platbuilder)