RasServer PPP 9600 baud rate

I am basically having troubles getting a PPP connection stable at a
baud rate of 9600.

I have PPP server turned on in platform builder and I set the needed
registry settings under [HKEY_LOCAL_MACHINE\Comm\ppp] and when I start
the device and connect to my device from a PC at 19200 everything is
fine. I can connect and disconnect at will.

Now I run the rasserver example from ..PUBLIC\COMMON\OAK\DRIVERS
\NETSAMP\RASSERVER\, with some modifications to set the baud rate at
9600 and when I go to my PC and try to connect it only gets to the
"verifying user name and password" and never connects. Now if I go
onto my device and under Network and Dial connections I start up my
19200@com2 connection let it fail then go back to my PC the PPP client
will connect. If I disconnect the client I have to go back to the
device and again run my 19200@com2 connects and so on. Of course this
not acceptable.

Ideally I would like the default start up of PPP to be the 9600 baud
rate I want but I can't find anywhere in the registry where this can
be set. Why and how does the default PPP settings get a 19200 baud
rate? And has anyone else had problems with the rasserver example
changing the baud rate?

Any help or information would be greatly appreciated.

Thanks
.

Relevant Pages

  • Re: RAS Server problem
    ... ==> The client PC's HyperTerminal shows the text. ... This means my hardware connection is functioning. ... > That code demonstrates how to set the baud rate using a function call. ... > Have you run a simple serial line test to verify basic serial line port to ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Bay Networks 350T Switch VT100 Terminal Help
    ... one configuratin of the cable. ... This sounds like you're talking at the wrong baud rate when you get ... that the connection is functioning in this case. ... work your way down to say 300 bps. ...
    (comp.terminals)
  • Re: Incompetent web authoring or much worse?
    ... prevailing 300 baud rate then prevalent. ... And a connection between a client and a server is usually ... not faster than the slowest part of the data path, ... Half lies are worth twice as much as whole lies. ...
    (alt.html)
  • Re: Reading data from a tty
    ... such as baud rate and whether or not you ... need to "dial out" via a modem to establish a connection, ... if someone is connecting to your serial port via a modem. ... it is just a matter of "opening the file and reading from it" ...
    (comp.unix.aix)
  • Re: Pick R83 serial connection (newbie)
    ... Baud Rate: 9600 ... Extend Character set: ON ... The question nobody seems to answer me is: ...
    (comp.databases.pick)