Windows CE 6.0 Hangs / Reboots
- From: Andy @ Loughborough University <AndyLoughboroughUniversity@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Tue, 10 Feb 2009 05:37:02 -0800
I am using and Advantech PCA-6753F board (Half-size all-in-one GXM SBC with
CPU, VGA/LCD and Ethernet) with a CF Card to IDE adapter as my hard drive.
When I boot the hardware the loading screen appears and the progress bar
fills, the system then hangs and then reboots itself at the same point each
time. The results from connecting a null-modem cable to the system are as
follows:
Microsoft Windows CE BIOS Bootloader Version 2.2 (Built Jul 14 2005)
INFO: code=0x4.
INFO: code=0x4.
INFO: code=0x4.
WARNING: code=0x20.
Jumping to image (address=0x226D10)
Debug Serial Init
SysInit: GDTBase=81531000 IDTBase=8153e8c0 KData=81539800
Windows CE Kernel for i486 Built on Sep 6 2006 at 19:10:13
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
PCIBIOS:: BIOS Address static map to addr=a00e0000
GetPicRoutingIrqTable: Start
search_pci_bios start
CE Ethernet Bootloader found 32Bit BIOS Entry master_bios32=a00fae20
bios32_call_offset=1b2a0 for CE/PC
Return from First BIOS EAX=49435000 EBX=f0000,ECX=b728 EDX=b2d0
32 PCI BIOS offset located.addr=1b2d0
32 PCI BIOS Present EDX=20494350,EAX=11 EBX=f0210,ECX=b700
+GetRoutingOption
search_pci_routing
search_pci_routing found entry =a00fdf70 CE/PC
GetRoutingOption, found ROM version for Routing table.
GetRoutingOption return SUCCESS .AH=8800
ScanConfiguredIrq with PCI Exclusive Irq Bit (wExClusive) =8800
ScanConfigureIrq: BufferSize = 32 @ address 815349ea
ScanConfigureIrq: for Bus=0 ,Device=11 SlotNumber=1
INTA_LinkValue=4,INTA_IrqBitMap=deb8
INTB_LinkValue=1,INTB_IrqBitMap=deb8
INTC_LinkValue=2,INTC_IrqBitMap=deb8
INTD_LinkValue=3,INTD_IrqBitMap=deb8
addIrqLink: LinkNumber=4,bus=0,device=11 associated with irq=11
ScanConfigureIrq: for Bus=0 ,Device=19 SlotNumber=0
INTA_LinkValue=1,INTA_IrqBitMap=deb8
INTB_LinkValue=0,INTB_IrqBitMap=deb8
INTC_LinkValue=0,INTC_IrqBitMap=deb8
INTD_LinkValue=0,INTD_IrqBitMap=deb8
addIrqLink: LinkNumber=1,bus=0,device=19 associated with irq=15
CEPC Firmware Init
RTC - Status Reg B - 0x02
g_dwCPUFeatures = 00808131
Looking for rom chain
Rom chain NOT found
Firmware Init Done.
Setting up softlog at 0x83ffc000 for 0x800 entries
Booting Windows CE version 6.00 for (x86)
&pTOC = 8153df10, pTOC = 8152f5e8, pTOC->ulRamFree = 81546000, MemForPT =
00023000
Old or invalid version stamp in kernel structures - starting clean!
Configuring: Primary pages: 10892, Secondary pages: 0, Filesystem pages = 5446
Booting kernel with clean memory configuration:
Memory Sections:
[0] : start: 8156a000, extension: 00006000, length: 02a8c000
X86Init done, OEMAddressTable = 80226d30, RAM mapped = 04000000.
Windows CE KernelInit
***** REBOOTS HERE *****
Microsoft Windows CE BIOS Bootloader Version 2.2 (Built Jul 14 2005)
INFO: code=0x4.
INFO: code=0x4.
INFO: code=0x4.
WARNING: code=0x20.
Jumping to image (address=0x226D10)
Debug Serial Init
SysInit: GDTBase=81531000 IDTBase=8153e8c0 KData=81539800
Windows CE Kernel for i486 Built on Sep 6 2006 at 19:10:13
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
PCIBIOS:: BIOS Address static map to addr=a00e0000
GetPicRoutingIrqTable: Start
search_pci_bios start
CE Ethernet Bootloader found 32Bit BIOS Entry master_bios32=a00fae20
bios32_call_offset=1b2a0 for CE/PC
Return from First BIOS EAX=49435000 EBX=f0000,ECX=b728 EDX=b2d0
32 PCI BIOS offset located.addr=1b2d0
32 PCI BIOS Present EDX=20494350,EAX=11 EBX=f0210,ECX=b700
+GetRoutingOption
search_pci_routing
search_pci_routing found entry =a00fdf70 CE/PC
GetRoutingOption, found ROM version for Routing table.
GetRoutingOption return SUCCESS .AH=8800
ScanConfiguredIrq with PCI Exclusive Irq Bit (wExClusive) =8800
ScanConfigureIrq: BufferSize = 32 @ address 815349ea
ScanConfigureIrq: for Bus=0 ,Device=11 SlotNumber=1
INTA_LinkValue=4,INTA_IrqBitMap=deb8
INTB_LinkValue=1,INTB_IrqBitMap=deb8
INTC_LinkValue=2,INTC_IrqBitMap=deb8
INTD_LinkValue=3,INTD_IrqBitMap=deb8
addIrqLink: LinkNumber=4,bus=0,device=11 associated with irq=11
ScanConfigureIrq: for Bus=0 ,Device=19 SlotNumber=0
INTA_LinkValue=1,INTA_IrqBitMap=deb8
INTB_LinkValue=0,INTB_IrqBitMap=deb8
INTC_LinkValue=0,INTC_IrqBitMap=deb8
INTD_LinkValue=0,INTD_IrqBitMap=deb8
addIrqLink: LinkNumber=1,bus=0,device=19 associated with irq=15
CEPC Firmware Init
RTC - Status Reg B - 0x02
g_dwCPUFeatures = 00808131
Looking for rom chain
Rom chain NOT found
Firmware Init Done.
Setting up softlog at 0x83ffc000 for 0x800 entries
Booting Windows CE version 6.00 for (x86)
&pTOC = 8153df10, pTOC = 8152f5e8, pTOC->ulRamFree = 81546000, MemForPT =
00023000
Old or invalid version stamp in kernel structures - starting clean!
Configuring: Primary pages: 10892, Secondary pages: 0, Filesystem pages = 5446
Booting kernel with clean memory configuration:
Memory Sections:
[0] : start: 8156a000, extension: 00006000, length: 02a8c000
X86Init done, OEMAddressTable = 80226d30, RAM mapped = 04000000.
Windows CE KernelInit
I am using the x86 BSP set to be an industrial device - industrial
controller. Has anyone got any idea what might be causing this and any
possible solutions?
.
- Follow-Ups:
- Re: Windows CE 6.0 Hangs / Reboots
- From: R. de Gravelaine
- Re: Windows CE 6.0 Hangs / Reboots
- Prev by Date: Windows CE 6.0 Loading Hangs / Reboots
- Next by Date: Windows CE 6.0 Hangs / Reboots
- Previous by thread: Windows CE 6.0 Loading Hangs / Reboots
- Next by thread: Re: Windows CE 6.0 Hangs / Reboots
- Index(es):
Relevant Pages
|
