Using the FTP-Server from CE 5.0

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Hello,

We want to transfer files from PC to a CE 5.0 device (Datalogic Barcode
scanner).
we want to use the existing ftp-server and have it activated by setting the
registry.
(http://msdn.microsoft.com/en-us/library/ms901310.aspx)

Unfortanly it works only with anonym and without write access, anybody have
a working configuration example with user/pwd and with write access?
I have tried the msdn-article, but i can´t get user/pwd/write access work
and i don´t know where to set the pwd of the users.

Here our not fully working registry setup from the handbook:
3.6.10 FTP Server Setup
The Datalogic Memor™ Operating System includes a sample File Transfer
Protocol (FTP) server. FTP is used for copying files to and from remote
computer systems over a network using TCP/IP. You can establish a
connection to your Datalogic Memor™ using its FTP Server through the
following interfaces:
WLAN using the WiFi radio
LAN through the Datalogic Memor™ Single Ethernet Cradle.
Proceed as follows:
1. Create a registry file (extension .reg) to setup and enable FTP Server
communication. A simple example file for anonymous logon is given below:
REGEDIT4

[HKEY_LOCAL_MACHINE\Comm\FTPD]
"DefaultDir"="\\"
"AllowAnonymousUpload"=dword:00000001
"UseAuthentication"=dword:00000000
"BaseDir"="\\"
"IsEnabled"=dword:00000001
"LogSize"=dword:00001000
"DebugOutputMask"=dword:00000017
"DebugOutputChannels"=dword:00000002
"IdleTimeout"=dword:0000012c
"AllowAnonymous"=dword:00000001
"AllowAnonymousVroots"=dword:00000001

2. Copy this file to the Datalogic Memor™ using ActiveSync®.
3. Launch the .reg file from the Datalogic Memor™.
4. Perform a warm boot on the Datalogic Memor™.

Sincerly
Rigoletto

.

Relevant Pages

  • vsftpd setup
    ... I am trying to setup a ftp server on a FreeBSD machine running ver. ... DSL link with an ISP and as there are several members contributing, ... bandwidth connection can be purchased from the ISP. ...
    (comp.unix.bsd.freebsd.misc)
  • Re: new vcsa user?
    ... If there's a good way to make my ftp server more ... > secure while still maintaining access to it from my home I'd like to hear ... If you have one system to transfer files to, then ftp is nuts. ...
    (comp.os.linux.security)
  • Re: Question on PureFTPd Connection
    ... Setup your router to redirect this port interval to the server, ... passive mode. ... Setup your FTP server to advertize the router public IP address in ...
    (comp.os.linux.networking)
  • Re: where to setup FTP server, inside or outside the network?
    ... You will want that outside your network completely. ... > One of the clients needs to setup a dedicated FTP server ... Setup the FTP parallel to the router using a different valid IP ...
    (microsoft.public.windows.server.sbs)
  • Setting up VSFTP at Home - Please Help
    ... I am trying to setup an ftp server at home so I can make some files ... Do I need to setup DNS? ... If I do, that means I need to have domain name hosted by my ISP, correct? ... I heard that some companies offer free DNS hosting, if that is correct, ...
    (comp.os.linux.networking)