Re: Remote Tools related problem with ActiveSync

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

Also, for accessing a device through the remote tools you need to have
the SDK of that board installed..
you are developing your own BSP, then you can easiy generate the SDK
for that also.
After installing the SDK, that device will be listed in the new
connection option in Remote tools


On Aug 4, 11:03 am, "Luca Calligaris"
<anonym...@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote:
Are you running the remote tools from the IDE? Try running the tools from
the 'Microsoft Visual Studio 2005' group in 'Start Menu': connect to the
device editing the 'Platform Builder' entry: set 'Transport' to 'TCP Connect
Transport' and 'Startup Server' to 'Activesync Startup provider'

--

Luca Calligariswww.eurotech.it

"DNA01" <DN...@xxxxxxxxxxxxxxxxxxxxxxxxx> ha scritto nel messaggionews:24E19CC9-A9E5-42CA-840B-A6AC21560B0D@xxxxxxxxxxxxxxxx

Hi.
I am porting target board using WinCE 6.0.
One problem related to ActiveSync occurs. The ActiveSync connection
between
Host PC and target board using USB is established correctly and file
copying
is
also performed with Explore. But Remote Tools such as Registry Edito,
Process
Viewer, Zoom and so on can't be connected to target board with Platform
Manager
Configuration set to ActiveSync and following error message is reported
when
connected.

 "The Microsoft ActiveSync reported the following error: Unable to load
device
  side components. Please check server configuration settings"

I forget to add some catalog items related to server configurations? Why?

.

Relevant Pages

  • RE: Modules for Remote Tools
    ... The pieces needed for remote tools connections are not ... this could also be caused by not installing the device SDK ... for your device before trying to make the connection. ... Now i have the ActiveSync and CAB File installer + KITL. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: ActiveSync vs Remote tools
    ... > Did you configure the Remote tools to use ActiveSync and target the device ... > SDK for the device which you are trying to connect to? ... > you have to configure the Default Device under that SDK to use ActiveSync. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: ActiveSync vs Remote tools
    ... Did you configure the Remote tools to use ActiveSync and target the device ... SDK for the device which you are trying to connect to? ...
    (microsoft.public.windowsce.platbuilder)
  • Platform manager bombs when configuring ActiveSync from EVC3
    ... I get a connection to my device with ActiveSync with no problem. ... However, when I try to launch the remote tools from EVC3, I get a ...
    (microsoft.public.windowsce.embedded.vc)
  • Re: Windows CE 6.0 remote tools broken?
    ... I've debugged and used remote tools with CE6 over enet, ... activesync in a while, and I've never done managed applications. ... I can succesfully build an OS in platform builder CE 6.0, ... With my previous activesync debugging experience the process of ...
    (microsoft.public.windowsce.platbuilder)