Re: USB to ethernet support for Eboot - Help

Correct

--
Dean Ramsier - eMVP
BSQUARE Corporation


"Mekas" <Mekas@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:94D3437D-3115-4A10-B5F2-4339A436E72A@xxxxxxxxxxxxxxxx
Hi,

This means whether the Arubaboard USB port is connected to host system's
USB
port. Our device will be seen as network adapter. Please clarify.

Regards,
Kumar

"Luca Calligaris" wrote:

In he ARUBABOARD (OMAP5912) BSP in Windows CE 6.0, eboot implements RNDIS
to
download the image:
this means that if you connect your PC to the USB device port, the device
will be seen as a network adapter.
You can use hat design as a reference. anyway, to be honest, I have never
used that BSP! The MSIII BSP bootloader
works in a similar way

--

Luca Calligaris
www.eurotech.it

"Mekas" <Mekas@xxxxxxxxxxxxxxxxxxxxxxxxx> ha scritto nel messaggio
news:186ABAC9-0A90-4F5F-8C9A-2138CDE4110A@xxxxxxxxxxxxxxxx
Hi,

I'm working on OMAP processor. My board doesnt have ETHERNET. I have
two
questions.

1. Can i use my USB OTG to download the nk.bin image as well as Kernel
debugging support. Whether this is possible. I hope KITL will support
USB.

2. Can i use a USB OTG to Ethernet adapter. So that for the device it
will
be USB and for target system it will be ethernet. I want to download
the
image as well as kernel debugging facility should be available.

In Mainstone BSP they have implemented some USB related things. I didnt
get
the exact thing. Which facility they have implemented.
Please advice.

Regards,
Kumar





.

Relevant Pages

  • usb_insert_transfer panic with if_zyd
    ... When I use my ZyXEL G-220 Wireless USB Stick with the if_zyd driver, ... <ACPI PCI bus> on pcib0 ... device problem, disabling port 1 ... <Ethernet over FireWire> on firewire0 ...
    (freebsd-current)
  • Re: Connecting SCT to desktop
    ... > ethernet cable and run the web cam with the other? ... However one key question is whether the USB port is USB1.1, ... Ethernet and control it directly from the remote computer, ...
    (sci.astro.amateur)
  • 2.6.10-rc1 & ahci & IHC6R & 925X & raid1
    ... usb modules for console, usb keyboard, network and starting a shell. ... ACPI: PM-Timer IO Port: 0x808 ... PCI: PCI BIOS revision 2.10 entry at 0xfb768, ... usbcore: registered new driver hub ...
    (Linux-Kernel)
  • usb does not work on vias smp mainboard
    ... I installed kernel 2.4.21 on an via's mainboard, it seems that the usb ... number of MP IRQ sources: ... PCI Interrupt Link ... Port indicators are not supported ...
    (Linux-Kernel)
  • Boot time Bluetooth BUG: warning: (value > m) at hid-core.c:793
    ... When the USB reciever is already plugged-in at boot-time and the ... hub 2-2:1.0: USB hub found ... Interface Descriptor: ... Hub Port Status: ...
    (Linux-Kernel)