Re: Compact Framework
- From: "Paul G. Tobey [eMVP]" <p space tobey no spam AT no instrument no spam DOT com>
- Date: Thu, 29 May 2008 15:17:36 -0700
The people who designed the operating system for and build the hardware for
the device are the device Original Equipment Manufacturer. They would know
how you should install the framework so that it will persist through a
reboot, if that's even possible (which it might not be).
My impression of installing in other locations besides \windows is that
there are still folders in \windows that are required for the framework to
persist, so, if \windows is actually in the RAM filesystem, you can't
install the framework without some significant messing around and a means to
copy those files that would normally be in \windows after the install back
to \windows on every boot of the device. Again, contact the OEM...
Paul T.
"tmoraes" <tmoraes@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:04F3E2A0-FB65-4922-AEE1-EE89C2C2AE57@xxxxxxxxxxxxxxxx
When i install in flash, just a folder of .NET2.0 CF still there.
I installed in the /Windows folder too but when i reboot my system the
files
was gone.
I whant to know how my registry settings persists.
When you told me about to ask the OEM, i don´t uderstend you.
Who is OEM?
Regards
Thiago
"Bruce Eitman [eMVP]" wrote:
Like Paul told you earlier, you need to ask the OEM. Several things need
to
be done:
1. The files need to persist. If you put them in flash are they still
there?
2. The registry settings need to persist.
3. The files need to be found by the OS when they are needed. If you
install them to flash, they may not be "found" becuase the files in the
\Windows folder will be found first.
--
Bruce Eitman (eMVP)
Senior Engineer
Bruce.Eitman AT EuroTech DOT com
My BLOG http://geekswithblogs.net/bruceeitman
EuroTech Inc.
www.EuroTech.com
"tmoraes" <tmoraes@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:BD50FC6A-3B29-433B-BCDD-1B7938B0A161@xxxxxxxxxxxxxxxx
I installed the .NET CF in local disk and the installation was a sucess,
i
tried to install in NAND Flash too and the installation was a sucess
too,
but
when i reboot my system the settings back to the original .NET Cf. What
can i
do about this?
How I save the settings in my system after the .NET CF installation?
Thanks
Thiago
"Paul G. Tobey [eMVP]" wrote:
You installed the .NET CF to a location on your device that doesn't
survive
having the power turned off or the device's registry wasn't saved
before
you
rebooted. Ask the device OEM what to do. At best, we can give you
general
advice, not the real correct answer for the actual device.
Paul T.
"tmoraes" <tmoraes@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:ACEDBC03-C4C4-4BDE-809F-E6EE473C4896@xxxxxxxxxxxxxxxx
Anybody know why?
When i install a newer version of .NET Framework in my device with
Windows
CE 5.0, my device install and at this momento it´s fine. But when i
turn-off
my device and then i turn-on my device return to original version of
.NET
CF.
Anybody could help me?
.
- References:
- Re: Compact Framework
- From: Paul G. Tobey [eMVP]
- Re: Compact Framework
- From: Bruce Eitman [eMVP]
- Re: Compact Framework
- From: tmoraes
- Re: Compact Framework
- Prev by Date: Re: Compact Framework
- Next by Date: Re: ASP on WinCE
- Previous by thread: Re: Compact Framework
- Next by thread: Stream video
- Index(es):
Relevant Pages
|
|
