Re: Plan to build a CE6 Boot loader for S3C2440 platform



Thanks. I'll begin to port the CE 5.0 boot loader to CE 6.0.

"Bruce Eitman [eMVP]" wrote:

Start with the CE 5.0 bootloader. IIRC, the changes for CE 6.0 are minor,
and are mostly to the sources file. Compare the installed BSPs to yours.

--
Bruce Eitman (eMVP)
Senior Engineer
Bruce.Eitman AT EuroTech DOT com
My BLOG http://geekswithblogs.net/bruceeitman

EuroTech Inc.
www.EuroTech.com

"Jia-Bin Huang" <JiaBinHuang@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:344B6C00-FA0D-469D-A888-56ED6AC50F1A@xxxxxxxxxxxxxxxx
I only have CE 5.0 BSP for this Samsung S3C2440A SOC Evaluation Board. So I
plan to impelement a boot loader following the CE 6.0 BSP framework. I
have
bought two pcs of the S3C2440A EVB. It is a simple board but with just
enough
functions: 400MHz CPU, 64MB SDRAM, 64MB NAND, 2MB NOR, 3.5" TFT LCD
w/Touch
Screen, COM ports, USB ports, Ethernet, Audio, Cam, IrDA, JTag interfaces
and
CE 5.0, Linux 2.6 support. I bought it for US$160 per pcs. I like it very
much.

Please give me further advise how to start the CE6.0 boot loader project?

"Bruce Eitman [eMVP]" wrote:

Do you already have a bootloader for that CPU? For CE 6.0? What is your
starting point? If you don't have a reference BSP for a board with that
CPU, you should get one.

--
Bruce Eitman (eMVP)
Senior Engineer
Bruce.Eitman AT EuroTech DOT com
My BLOG http://geekswithblogs.net/bruceeitman

EuroTech Inc.
www.EuroTech.com

"Jia-Bin Huang" <JiaBinHuang@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:80040E82-1DC6-47AC-86CE-8CE9D59F73C8@xxxxxxxxxxxxxxxx
I plan to build a CE6 boot loader for S3C2440A platform from scratch.
The
purpose of this self project is just for learning. Would anybody give
me
some
advises?

1. Usually how many man-hours would it take for an average-skill
firmware
engineer to finish this project?

2. Do I need to "clone" one of the sample BSP's in WinCE 6.0? Which
one?

3. After cloning, how do I get an empty and clean development platform
for
the planned project from scratch?







.



Relevant Pages

  • Re: Why project is required for a new boot loader development
    ... You need to create a basic CEC file for your BSP. ... > anything about how to build a project for the particular hw platform. ... But I don't have any hardware platform built yet. ... >> boot loader is just one part of a complete system. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Boot loader woes
    ... code base has been in use for ... production for several years. ... engineers who actually wrote/ported the BSP is with the company any ... The boot loader just does not start at all. ...
    (comp.os.vxworks)
  • Re: Bootloader wince.net 4.2
    ... just because we have a PXA255 BSP we sell, but because I know how much it ... the IDE to build the boot loader is the least of your worries. ... BSP includes a DIRS file in the root of the BSP folder %_TARGETPLATROOT% ... them (e.g boot loader needs physical addresses, ...
    (microsoft.public.windowsce.platbuilder)
  • Re: C3500XL Boot Loader
    ... INTERIM SOFTWARE ... The job of the boot loader is to get the normal image ... once its handed off to IOS, it doesn't matter what it used to be, only IOS ... At the moment some of the ports don't show up. ...
    (comp.dcom.sys.cisco)
  • Re: WM5 MS BT Stack
    ... is this BSP thing a WM5 only? ... > Peter is exactly right. ... the Windows Mobile UI allows you to ... > configure COM ports 0 to 9 by default. ...
    (microsoft.public.pocketpc.developer)