Re: Plan to build a CE6 Boot loader for S3C2440 platform
- From: "Bruce Eitman [eMVP]" <bruce.eitman.nospam@xxxxxxxxxxxxxxxxxxx>
- Date: Wed, 28 May 2008 08:28:48 -0400
Start with the CE 5.0 bootloader. IIRC, the changes for CE 6.0 are minor,
and are mostly to the sources file. Compare the installed BSPs to yours.
--
Bruce Eitman (eMVP)
Senior Engineer
Bruce.Eitman AT EuroTech DOT com
My BLOG http://geekswithblogs.net/bruceeitman
EuroTech Inc.
www.EuroTech.com
"Jia-Bin Huang" <JiaBinHuang@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:344B6C00-FA0D-469D-A888-56ED6AC50F1A@xxxxxxxxxxxxxxxx
I only have CE 5.0 BSP for this Samsung S3C2440A SOC Evaluation Board. So I
plan to impelement a boot loader following the CE 6.0 BSP framework. I
have
bought two pcs of the S3C2440A EVB. It is a simple board but with just
enough
functions: 400MHz CPU, 64MB SDRAM, 64MB NAND, 2MB NOR, 3.5" TFT LCD
w/Touch
Screen, COM ports, USB ports, Ethernet, Audio, Cam, IrDA, JTag interfaces
and
CE 5.0, Linux 2.6 support. I bought it for US$160 per pcs. I like it very
much.
Please give me further advise how to start the CE6.0 boot loader project?
"Bruce Eitman [eMVP]" wrote:
Do you already have a bootloader for that CPU? For CE 6.0? What is your
starting point? If you don't have a reference BSP for a board with that
CPU, you should get one.
--
Bruce Eitman (eMVP)
Senior Engineer
Bruce.Eitman AT EuroTech DOT com
My BLOG http://geekswithblogs.net/bruceeitman
EuroTech Inc.
www.EuroTech.com
"Jia-Bin Huang" <JiaBinHuang@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:80040E82-1DC6-47AC-86CE-8CE9D59F73C8@xxxxxxxxxxxxxxxx
I plan to build a CE6 boot loader for S3C2440A platform from scratch.
The
purpose of this self project is just for learning. Would anybody give
me
some
advises?
1. Usually how many man-hours would it take for an average-skill
firmware
engineer to finish this project?
2. Do I need to "clone" one of the sample BSP's in WinCE 6.0? Which
one?
3. After cloning, how do I get an empty and clean development platform
for
the planned project from scratch?
.
- Follow-Ups:
- Re: Plan to build a CE6 Boot loader for S3C2440 platform
- From: Jia-Bin Huang
- Re: Plan to build a CE6 Boot loader for S3C2440 platform
- References:
- Re: Plan to build a CE6 Boot loader for S3C2440 platform
- From: Bruce Eitman [eMVP]
- Re: Plan to build a CE6 Boot loader for S3C2440 platform
- Prev by Date: ddex3 and CETK for direcdraw fails while allocating surface.
- Next by Date: Re: conmanclient2.exe error
- Previous by thread: Re: Plan to build a CE6 Boot loader for S3C2440 platform
- Next by thread: Re: Plan to build a CE6 Boot loader for S3C2440 platform
- Index(es):
Relevant Pages
|
|
