Re: Plan to build a CE6 Boot loader for S3C2440 platform
- From: "Bruce Eitman [eMVP]" <bruce.eitman.nospam@xxxxxxxxxxxxxxxxxxx>
- Date: Tue, 27 May 2008 09:14:48 -0400
Do you already have a bootloader for that CPU? For CE 6.0? What is your
starting point? If you don't have a reference BSP for a board with that
CPU, you should get one.
--
Bruce Eitman (eMVP)
Senior Engineer
Bruce.Eitman AT EuroTech DOT com
My BLOG http://geekswithblogs.net/bruceeitman
EuroTech Inc.
www.EuroTech.com
"Jia-Bin Huang" <JiaBinHuang@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:80040E82-1DC6-47AC-86CE-8CE9D59F73C8@xxxxxxxxxxxxxxxx
I plan to build a CE6 boot loader for S3C2440A platform from scratch. The
purpose of this self project is just for learning. Would anybody give me
some
advises?
1. Usually how many man-hours would it take for an average-skill firmware
engineer to finish this project?
2. Do I need to "clone" one of the sample BSP's in WinCE 6.0? Which one?
3. After cloning, how do I get an empty and clean development platform for
the planned project from scratch?
.
- Prev by Date: Re: PXA270 I2C register mapping
- Next by Date: Disable Nagle Algorithmus with TCP_NODELAY on WinCE6
- Previous by thread: ActivateDevice returns error 110 (ERROR_OPEN FAILED)
- Next by thread: Re: Plan to build a CE6 Boot loader for S3C2440 platform
- Index(es):
