Re: WINCE : Display driver : VGA to QVGA and QVGA to VGA mode


Thanks Michel,

I will try it...
I develop the drivers, I have access to display driver code.
Let me know if you have any idea to make my work simple :)).


Thanks
BLUE-ice

"Michel Verhagen (eMVP)" wrote:

In Windows CE 6.0 it is possible. Search this NG for "Dynamic
Resolution" and you'll find what you need. There is no documentation,
but the RageXL driver supports dynamic resolutions. Are you an
application developer or do you have access to the BSP (and display
driver source)?


Good luck,

Michel Verhagen, eMVP
Check out my blog: http://GuruCE.com/blog

GuruCE Ltd.
Microsoft Embedded Partner
http://GuruCE.com
Consultancy, training and development services.

~:BLUE:~ wrote:



Hi all,



I came accross this tricky situation in my project that

I want to change the resolution of display driver in run time,

for some reasion I dont get the VGA display out put,

if I make changes and restart the h/w it take effect.



Is there a way to tell a GWES when display driver changes its mode?



Thanks

BLUE-ice


.

Relevant Pages

  • Re: WINCE : Display driver : VGA to QVGA and QVGA to VGA mode
    ... Good luck, ... "Michel Verhagen (eMVP)" wrote: ... Resolution" and you'll find what you need. ... Are you an application developer or do you have access to the BSP (and display driver source)? ...
    (microsoft.public.windowsce.embedded)
  • Re: How can I modify the value of pam which is a parameter of function DrvEnablePDEV?
    ... ChangeDisplaySettingsEx works on the currently installed ... As I was explaining in an earlier post, the `default` resolution is really ... Or are you trying to load a display driver on the fly and get it to work? ... install this application when after I install my display driver to set the ...
    (microsoft.public.development.device.drivers)
  • Re: How can I modify the value of pam which is a parameter of function DrvEnablePDEV?
    ... ChangeDisplaySettingsEx works on the currently installed ... As I was explaining in an earlier post, the `default` resolution is really ... Or are you trying to load a display driver on the fly and get it to work? ... install this application when after I install my display driver to set ...
    (microsoft.public.development.device.drivers)
  • Re: Display driver
    ... Resolution and color depth is determined by display driver you're using. ... Windows CE Multimedia and Graphics ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Can the default Resolution of windows XP be modified in video driver ?
    ... a display driver is choosen based upon ... screen resolution, color-depth, of each DEVMODEW. ... Vista starts in VGASave when in WinPE phase, and, immediately it start PnP ... If a WDDM driver is found, then, PnP will cause a mode change. ...
    (microsoft.public.development.device.drivers)