Re: RTL 8139D Lan card using in Windows CE 5.0

Hello,
Thanks for the reply,
I was already done this Connectivity option.i did not configure
CEPC9279 device.
Tell me the Available driver in catalog item for RTl 8139 is work for
Any Pci Rtl 8139 Card?
if no then tell me the solution?
I want to install RTL 8139d card driver on Wicne 5.0 ZF micro board.
.

Relevant Pages

  • Re: RTL 8139
    ... So, you're NOT using the RTL adapter as an ordinary Ethernet adapter, but as ... driver; that won't work because you'll have both the kernel and the driver ...
    (microsoft.public.windowsce.platbuilder)
  • Determining eth -> driver mapping
    ... How can I tell which eth is mapped to which driver? ... I have an rtl 8139 onboard, an usb rtl 8150 and cable usb CDCEther. ... when I want to use the other ones to simplify the network settings, ...
    (Debian-User)
  • Re: RTL 8139D Lan card using in Windows CE 5.0
    ... using the CEPC BSP. ... In hardware I have Realtek 8139D PCI card. ... 1)I am using the RTL 8139 driver given in catalog item.But its not ... If i want to use RTL 8139 driver Which Third party help me about this ...
    (microsoft.public.windowsce.embedded)
  • Re: RTL 8139D Lan card using in Windows CE 5.0
    ... using the CEPC BSP. ... In hardware I have Realtek 8139D PCI card. ... 1)I am using the RTL 8139 driver given in catalog item.But its not ... If i want to use RTL 8139 driver Which Third party help me about this ...
    (microsoft.public.windowsce.embedded)
  • Re: RTL 8139
    ... If i ping from "ping 192.168.10.81 " it shows request time out. ... so pls tell me how i configured RTL 8139 driver in registery. ... Tell me the platform builder RTl 8139 driver is worked as NDIS driver ...
    (microsoft.public.windowsce.platbuilder)