Re: RTL 8139D Lan card using in Windows CE 5.0

Again; give us more detailed technical information (like debug output, source code snippets, board manufacturer, BSP used, etc, etc).

Without knowing WHAT goes wrong, nobody will be able to help you. Show us debug output.

Good luck,

Michel Verhagen, eMVP
Check out my blog: http://GuruCE.com/blog

GuruCE Ltd.
Microsoft Embedded Partner
http://GuruCE.com
Consultancy, training and development services.

ashsantu@xxxxxxxxx wrote:
On Apr 14, 10:23 pm, "Michel Verhagen (eMVP)" <mic...@xxxxxxxxxx>
wrote:
If you want help, you either have to give us more detailed technical
information (like debug output, source code snippets, board
manufacturer, BSP used, etc, etc) or pay somebody to create the driver
for you.

Good luck,

Michel Verhagen, eMVP
Check out my blog:http://GuruCE.com/blog

GuruCE Ltd.
Microsoft Embedded Partner
http://GuruCE.com
Consultancy, training and development services.



ashsa...@xxxxxxxxx wrote:
Hello,
I am working Windows CE 5.0 Platform builder.I have x-86 based SBC &
using the CEPC BSP.
In hardware I have Realtek 8139D PCI card.
1)I am using the RTL 8139 driver given in catalog item.But its not
work properly.
If i want to use RTL 8139 driver Which Third party help me about this
card driver.
2)I am building image & try to download the hardware using Ethernet
connectivity.
Its not work.
Pls any one konws help me.
Thank you- Hide quoted text -
- Show quoted text -

Hello
Thanks for the reply.

I am using the ZF x86 SBC.CEPC BSP.
RTL 8139 is the Network card.
IS it ok i was used catalog item Driver.
Why This card is not work on image downloading.
is it any setting.
As per platform builder help they mention its supported.
Pls give me guideline.
I want free driver in RTL 8139 for CEPC BSP.

Than you.
.

Relevant Pages

  • Re: RTL 8139D Lan card using in Windows CE 5.0
    ... using the CEPC BSP. ... In hardware I have Realtek 8139D PCI card. ... 1)I am using the RTL 8139 driver given in catalog item.But its not ... If i want to use RTL 8139 driver Which Third party help me about this ...
    (microsoft.public.windowsce.embedded)
  • Re: RTL 8139D Lan card using in Windows CE 5.0
    ... using the CEPC BSP. ... In hardware I have Realtek 8139D PCI card. ... 1)I am using the RTL 8139 driver given in catalog item.But its not ... If i want to use RTL 8139 driver Which Third party help me about this ...
    (microsoft.public.windowsce.embedded)
  • Driver can not be unloaded messages
    ... We are using CE 5.0 on proprietary X86 hardware with the VIA CLE266 BSP. ... At start up the messages below appear in debug output. ... Driver cannot be unloaded. ... DeviceFolder::LoadDevice!Enumerate Found deprecated load instructions at ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Incorporating a 3rd party driver into a BSP/Image
    ... any sample code, I though we were talking about a the Summit binaries. ... folder and run? ... As far as 'making it part of my BSP', I'm not sure what that means ... driver into its own catalog item and add/remove them from any OS ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Reg. USB Driver while booting wince 5.0
    ... My USB driver is working in my evaluation board and i was able to ... BSP Interrupt Enable IRQ ... [NOTIFY] ...
    (microsoft.public.windowsce.platbuilder)