Re: Can't run WINCE from a flash drive on my AMD M/B
- From: Guy <Guy@xxxxxxxxxxxxxxxxxxxxxxxxx>
- Date: Sun, 23 Mar 2008 07:10:01 -0700
Tnx Paul,
Could you please tell me how can i solve this problem?
"Paul G. Tobey [eMVP]" wrote:
It's, as you might expect from reading the messages, waiting for a bootable.
filesystem to be mounted. You've selected hive-based registry? You've set
things up for the hive to be on your flash drive? If so, I'd guess that you
didn't put the storage manager entries for your flash drive in HIVE BOOT
SECTION/END HIVE BOOT SECTION in your registry, so there's no instructions
for the Storage Manager to load the flash drive driver, so there's never a
bootable filesystem, so it won't boot. It could also be that you've set the
boot options so that Storage Manager itself isn't getting started.
Paul T.
"Guy" <Guy@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:CA7BB4AE-23D3-4E79-B148-D20690FF61ED@xxxxxxxxxxxxxxxx
Hi,
I'm trying to run WinCE 6 on a flash drive but without any success,
The progress bar loads to 100% and then i get a black screen,
When i connected the M/B to the hyper-terminal i got the following output:
Could you please advise?
Tnx.
INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
PCIBIOS:: BIOS Address static map to addr=a00e0000
GetPicRoutingIrqTable: Start
search_pci_bios start
CE Ethernet Bootloader found 32Bit BIOS Entry master_bios32=a00fa4c0
bios32_call
_offset=1a930 for CE/PC
Return from First BIOS EAX=49435000
EBX=f0000,ECX=dfb4 E
DX=a960
32 PCI BIOS offset located.addr=1a960
32 PCI BIOS Present
EDX=20494350,EAX
=11 EBX=f0210,EC
+GetRoutingOption
search_pci_routing
search_pci_routing Entry Checksum Error @a00fdf40search_pci_routing end
fails
GetRoutingOption with buffer Size 512 bytes buffer DS80220040:addr
=8289d7ea
GetRoutingOption return SUCCESS .AH=0
ScanConfiguredIrq with PCI Exclusive Irq Bit (wExClusive) =c20
ScanConfigureIrq: BufferSize = 80 @ address 8289d7ea
ScanConfigureIrq: for Bus=0 ,Device=8 SlotNumber=1
INTA_LinkValue=3,INTA_IrqBitMap=cb8
INTB_LinkValue=4,INTB_IrqBitMap=cb8
INTC_LinkValue=1,INTC_IrqBitMap=cb8
INTD_LinkValue=2,INTD_IrqBitMap=cb8
ScanConfigureIrq: for Bus=0 ,Device=6 SlotNumber=2
INTA_LinkValue=1,INTA_IrqBitMap=cb8
INTB_LinkValue=2,INTB_IrqBitMap=cb8
INTC_LinkValue=3,INTC_IrqBitMap=cb8
INTD_LinkValue=4,INTD_IrqBitMap=cb8
addIrqLink: LinkNumber=1,bus=0,device=6 associated with irq=11
ScanConfigureIrq: for Bus=0 ,Device=9 SlotNumber=3
INTA_LinkValue=4,INTA_IrqBitMap=cb8
INTB_LinkValue=1,INTB_IrqBitMap=cb8
INTC_LinkValue=2,INT
INTD_LinkValue=3,INTD_IrqBitMap=cb8
addIrqLink: LinkNumber=4,bus=0,device=9 associated with irq=10
ScanConfigureIrq: for Bus=0 ,Device=15 SlotNumber=0
INTA_LinkValue=1,INTA_IrqBitMap=cb8
INTB_LinkValue=2,INTB_IrqBitMap=cb8
INTC_LinkValue=3,INTC_IrqBitMap=cb8
INTD_LinkValue=4,INTD_IrqBitMap=cb8
ScanConfigureIrq: for Bus=0 ,Device=1 SlotNumber=0
INTA_LinkValue=1,INTA_IrqBitMap=cb8
INTB_LinkValue=2,INTB_IrqBitMap=cb8
INTC_LinkValue=3,INTC_IrqBitMap=cb8
INTD_LinkValue=4,IN
addIrqLink: LinkNumber=1,bus=0,device=1 associated with irq=11
CEPC Firmware Init
RTC - Status Reg B - 0x02
g_dwCPUFeatures = 0088a93d
Looking for rom chain
Rom chain NOT found
Firmware Init Done.
Setting up softlog at 0x83ffc000 for 0x800 entries
Booting Windows CE version 6.00 for (x86)
&pTOC = 828a5f10, pTOC = 82897858, pTOC->ulRamFree = 828ae000, MemForPT =
000030
00
Old or invalid version stamp in kernel structures - starting clean!
Configuring: Primary pages: 5959, Secondary pages: 0, Filesystem pages =
2979
Booting kernel with clean memory configuration:
Memory Sections:
[0] : start: 828b2000, extension: 00003000, length: 01747000
X86Init done, OEMAddressTable = 80226b00, RAM mapped = 04000000.
Windows CE KernelInit
Reserve VM for kernel XIP DLls, first = c0010000, last = c0df0000
g_pprcNK == 0x828a3c80
Updated eptr->e32_vsize to = 00013000
Initializing Memory Mapped File Support
Scheduling the first thread.
LoaderInit: Initialing loader
Updated eptr->e32_vsize to = 00013000
Updated eptr->e32_vsize to = 00074000
Heap Statistics at 0xC00D37A0
Did not find emulation code for x86... using floating point hardware.
PGPOOL: Reserved 768 pages for Loader pool
PGPOOL: Reserved 256 pages for File pool
Message Queue support initialized, g_hMsgQHeap = d0040750
FSDMGR!DllMain: DLL_PROCESS_ATTACH
CertMod.dll not found, using old OEM
Trust
Mod
el
FileSystem Starting - starting with clean file system
FSDMGR!STOREMGR_Initialize
FSDMGR!InitializeStoreAPI
FSDMGR!MountTable_t::RegisterVolumeName: Registered "StoreMgr" at index
2FSDMGR!
MountTable_t::RegisterVolume: Registered volume at index 2
(Name="StoreMgr",
Mou
ntFlags=0x1)FSDMGR!InitializeROMFileSystem: File System=ROM
FSDMGR!MountTable_t::RegisterVolumeName: Registered "ROM" at index
3FSDMGR!Mount
Table_t::RegisterVolume: Registered volume at index 3 (Name="ROM",
MountFlags=0x
71)FSVOL: Opening existing volume
FSVOL: Volume heap already initialized
FSREG: Mounted ROM portion of boo
FSVOL: Creating clean virtual volume
FSVOL: Initializing volume heap
FSREG: Mounted RAM portion of boot registry
Override Serial Driver: No COM port selected for serial KITL transport, no
overr
ide necessary.
FS: Creating signal event SYSTEM/DevMgrApiSetReady
FS: Creating signal event SYSTEM/PowerManagerReady
FS: Creating signal event SYSTEM/GweApiSetReady
FS: Creating signal event SYSTEM/BatteryAPIsReady
FS: Creating signal event SYSTEM/NLedAPIsReady
FSREG: Unable to read value "Start DevMgr" under HKEY_LOCAL_M
s
FILESYS: Starting boot phase 0.
FSDMGR!STOREMGR_StartBootPhase BootPhase=0 (PrevBootPhase=-1)
FSDMGR: File security disabled.
FSDMGR!AutoLoadFileSystems: CurrentBootPhase=0, LoadFlags=1
FSDMGR!AutoLoadFileSystem: CurrentBootPhase=0,FSDMGR!PNPThread: Using
PNPUnloadD
elay of 4096
FSDMGR!PNPThread: PNPThread starting!
RootKey=System\StorageManager\AutoLoad, FileSystem_t=ObjectStore
FILESYS: RAM File System FSD_MountDisk registering folder "Object Store"
FSDMGR!MountTable_t::RegisterVolumeName: Registered "Objec
MGR!MountTable_t::RegisterVolume: Registered volume at index 4 (Name="",
MountFl
ags=0x44)FILESYS: Starting boot phase 1.
FSDMGR!STOREMGR_StartBootPhase BootPhase=1 (PrevBootPhase=0)
FSDMGR!AutoLoadFileSystems: CurrentBootPhase=1, LoadFlags=1
FSDMGR!AutoLoadFileSystem: CurrentBootPhase=1,
RootKey=System\StorageManager\Aut
oLoad, FileSystem_t=sdnpcid
FSDMGR!AutoLoadBlockDevice: Auto-loading block driver from
"Drivers\BuiltIn\PCI\
Instance\NAND_Flash"FSDMGR!MountStore: Attaching new storage device
"sdnpcid"FSD
MGR!MountStore: Failed mounting store "sdnpcid"; error=126
FSDMGR!StoreDisk_t::~StoreDisk_t: deleting store
(D0046510)FSDMGR!AutoLoadFileSy
stems: Unable to auto-load HKLM\System\StorageManager\AutoLoad\sdnpcid;
error=12
6FILESYS: Starting device and waiting for boot file system.
*** DLL_PROCESS_ATTACH - Current Process: 0x42, ID: 0x400002 ***
Filesys: Loaded device.dll
FILESYS: +InitDeviceFileSystems
FSDMGR!MountTable_t::RegisterVolumeName: Registered "$device" at index
5FSDMGR!M
ountTable_t::RegisterVolume: Registered volume at index 5 (Name="$device",
Mount
Flags=0x1)FSDMGR!MountTable_t::RegisterVolumeName: Registered "$bus" at
index 6F
SDMGR!MountTable_t::RegisterVolume: Registered volume at index 6
(Name="$bus", M
ountFlags=0x1)-InitDeviceFileSystems: Waiting for device manager to signal
BootP
hase1 completion.
status is 1
Ceddk!CalibrateStallCounter: Enter
Ceddk!CalibrateStallCounter: Could not find stall counter
Ceddk!BeginCalibration: min(1194) max(1326)
Ceddk!BeginCalibration: El
Ceddk!BeginCalibration: Delay is 44
DEVICE!DevloadInit
DEVICE!InitDevices: Root Key is Drivers\BuiltIn.
DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\Prefix)
returned
2
DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\BusPrefix)
return
ed 2
DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\PCI\Prefix)
retur
ned 2
DEVICE!RegReadActivationValues
RegQueryValueEx(Drivers\BuiltIn\PCI\BusPrefix) re
turned 2
Warning: No Match template is found for following PCI Device
- Follow-Ups:
- Re: Can't run WINCE from a flash drive on my AMD M/B
- From: Paul G. Tobey [eMVP]
- Re: Can't run WINCE from a flash drive on my AMD M/B
- References:
- Can't run WINCE from a flash drive on my AMD M/B
- From: Guy
- Re: Can't run WINCE from a flash drive on my AMD M/B
- From: Paul G. Tobey [eMVP]
- Can't run WINCE from a flash drive on my AMD M/B
- Prev by Date: Re: PXA320 SSP
- Next by Date: Re: Windwos CE 5.0 Hide System Cursor
- Previous by thread: Re: Can't run WINCE from a flash drive on my AMD M/B
- Next by thread: Re: Can't run WINCE from a flash drive on my AMD M/B
- Index(es):
Relevant Pages
|
