Hive registry and flash storage

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Hi,
I am working with Hive registry and flash storage in wince 5.0
I am getting the following debug messages once i boot OS.
My flash media driver failed initializing.
Is it because of FMD it hangs or anyother reason for it.



FileSystem Starting - starting with clean file system
FS: initializing ROM/RAM file system
FS: Registering file system ROM, index 2, flags 0x00000031
FS: Mount complete (ROM, index 2, flags 0x00000031)
OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35
FSVOL: Opening existing volume
FSVOL: Volume heap already initialized
FSREG: Mounted ROM portion of boot registry
FSVOL: Creating clean virtual volume
FSVOL: Initializing volume heap
FSREG: Mounted RAM portion of boot registry
FS: Creating signal event SYSTEM/DevMgrApiSetReady
FS: Creating signal event SYSTEM/PowerManagerReady
FS: Creating signal event SYSTEM/GweApiSetReady
FS: Creating signal event ReleaseFSD
FILESYS: Starting storage manager.
FS: Registering file system StoreMgr, index 3, flags 0x00000001
FLASHDRV.DLL:Unable to initialize FLASH Media Driver (FMD).
FLASHDRV.DLL:CP_StopCompactor() - Unable to suspend compactor
thread!!!
FLASHDRV.DLL:CP_DeinitCompactor() - Unable to stop compactor,
CP_StopCompactor() failed
Loading partition driver mspart.dll hModule=8DD9762C
Driver mspart.dll loaded
CStore Destructor(000C2430)
FILESYS: Restarting storage manager.
OEMIoControl: Unsupported Code 0x10100cc - device 0x0101 func 51
FILESYS: Starting device and waiting for boot file system.
OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9
*** DLL_PROCESS_ATTACH - Current Process: 0x42, ID: 0x4dd8d242 ***
+InitDeviceFileSystems
FS: Registering file system $device, index 4, flags 0x00000001
FS: Registering file system $bus, index 5, flags 0x00000001
-InitDeviceFileSystems: status is 1
Ceddk!CalibrateStallCounter: Enter
Ceddk!CalibrateStallCounter: Could not find stall counter
Ceddk!BeginCalibration: min(32501) max(36112)
Ceddk!BeginCalibration: Calibration timed out (51 tries). Defaulting
to 1 ms resolution.
FS: Waiting for device to signal BootPhase1 completion
DEVICE!DevloadInit
DEVICE!InitDevices: Root Key is Drivers\BuiltIn.
DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\Prefix)
returned 2
DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn
\BusPrefix) returned 2
DEVICE!RegReadActivationValues RegQueryValueEx(Drivers\BuiltIn\SMFLASH
\BusPrefix) returned 2
FILESYS: Starting device and waiting for boot file system.
OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9
OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9
OEMIoControl: Unsupported Code 0x1010024 - device 0x0101 func 9


Regards,
Kirthika
.

Relevant Pages

  • Re: Hive-Based Registry Problem!!
    ... I tried both eboot and flash boot. ... FileSystem Starting - starting with clean file system ... 0x87feb2ac: FILESYS: Restarting storage manager. ... doesn't exist for logical sector 0x0!!! ...
    (microsoft.public.windowsce.platbuilder)
  • Re: HDD down-Data Recovery Question
    ... >Windows XP could not start because the following file is missing or corrupt: ... ChkDsk is lethal in a data crisis, ... Windows can't boot without writing to the hard drive, ... - use Norton Disk Edit or similar if file system needs repair ...
    (microsoft.public.windowsxp.general)
  • Re: HDD Becoming Unstable ?
    ... Bart PE boot CDR rather than your own Windows installation. ... location on the HD, so that file system errors arise, and if the ... handling code did not properly maintain the FAT32 free space value, ... But FAT32 has far larger FATs, so this process can have a material ...
    (microsoft.public.windowsxp.general)
  • CE6.0 Hive-based registry in Hard Disk
    ... hive files in Hard Disk(FAT file system). ... ; HIVE BOOT SECTION ... FILESYS: Starting boot phase 0. ... Starting device and waiting for boot file system. ...
    (microsoft.public.windowsce.platbuilder)
  • fstab entries for external USB hard drives led to fsck.ext3 failure on boot, bug?
    ... 'F!3@$%ing fsck! ... Please repair the file system manually. ... CONTROL-D will terminate this shell and resume system boot. ... were to allow me to quickly mount an external hard drive ...
    (Debian-User)