Re: How do I load a third party driver in Windows CE 6.0

Tech-Archive recommends: Fix windows errors by optimizing your registry

Do you mean USB Host Client driver as discribed at the following link?:

http://msdn2.microsoft.com/en-us/library/aa930914.aspx
--
Don


"Bruce Eitman [eMVP]" wrote:

You need a USB Host Class driver since you will be plugging it into the USB
Host, not USB Function.

--
Bruce Eitman (eMVP)
Senior Engineer
beitman AT applieddata DOT net

Applied Data Systems
www.applieddata.net
An ISO 9001:2000 Registered Company
Microsoft WEP Gold-level Member

"Don" <Don@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:039868F2-2505-402B-AA1B-1FFC05C04189@xxxxxxxxxxxxxxxx
Hi,

I have been reading some of the documentation for USB drivers. It is
unclear to me which type of drivers I need to read and write the end
points
described below for my USB to 485 converter. I think I need a USB Function
Serial Client Driver can anyone confirm?


Device Descriptor:
bcdUSB: 0x0110
bDeviceClass: 0x00
bDeviceSubClass: 0x00
bDeviceProtocol: 0x00
bMaxPacketSize0: 0x08 (8)
idVendor: 0x1905
idProduct: 0x1956
bcdDevice: 0x0400
iManufacturer: 0x01
iProduct: 0x02
iSerialNumber: 0x03
bNumConfigurations: 0x01

ConnectionStatus: DeviceConnected
Current Config Value: 0x01
Device Bus Speed: Full
Device Address: 0x01
Open Pipes: 2

Endpoint Descriptor:
bEndpointAddress: 0x81
Transfer Type: Bulk
wMaxPacketSize: 0x0040 (64)
bInterval: 0x00

Endpoint Descriptor:
bEndpointAddress: 0x02
Transfer Type: Bulk
wMaxPacketSize: 0x0040 (64)
bInterval: 0x00

--
Don


"amag" wrote:


Serial communications USB-drivers typically goes into:

[HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients\<X>_<Y>\Default\Default\USBSER_CLASS]

where <X> is the USB vendor id in decimal(!) and <Y> is the device id in
decimal.

But you should probably check what values you need with FTDI. At least
you'll need the Dll-value:

"Dll"="mydrv.dll"

Btw have you tested communication with the driver, last I checked FTDI
wasn't to eager to provide CE6 implementations of their drivers.

Hope it helps,

/AM

"Don" wrote:

Hi,

I have a USB to 485 converter with a FTDI chip on it. FTDI supplies an
inf
file and a dll that supports windows CE. Currently I have to copy the
inf
and dll file to the windows directory and when I plug the USBto485
converter
in a window pops up and I have to type the name of the dll in that
window and
it works. I would like this to be more automatic. I am assuming that
I can
modify a bib file in my project and get the files in the windows
directory,
but how do I make it so the window does not come up asking me for the
name of
the dll? Are there registry entries I can add so the dll is already
present?
--
Don



.

Relevant Pages

  • Re: Cantt copy to DVD
    ... Driver ... DSP Group TrueSpeechSoftware CODEC: ... Ricoh 1394 Controller May Not Work with Windows XP ... Windows XP Does Not Detect Your New USB Device ...
    (microsoft.public.windows.mediacenter)
  • Re: Active home pro stopped working II
    ... It really depends on the version of windows. ... is just plugging the cm15a to a different USB port on your PC. ... I've seen stuff get wacked out, driver wise, under windows. ... I think what he's describing are the sound effects in the AHP software. ...
    (comp.home.automation)
  • Re: Do you tell me how to generate the usbser.dll for PB6?
    ... I am going to find a way to generate the dll from lib file. ... Please note that the 1118/206 is the USB device's PID/VID. ... then it want to load the dll file in the ... // Attempt to load client driver based on registry settings ...
    (microsoft.public.windowsce.platbuilder)
  • Re: How do I load a third party driver in Windows CE 6.0
    ... Host, not USB Function. ... I have been reading some of the documentation for USB drivers. ... and dll file to the windows directory and when I plug the USBto485 ...
    (microsoft.public.windowsce.embedded)
  • Re: aAttention MSVPs. USB 2.0 Drivers not recognised - XP is defective !
    ... General USB troubleshooting in Windows XP ... both for the latest USB 2.0 driver for my motherboard and for my USB/ ... My mobo has six ports, of which four are designated as USB 2.0. ...
    (microsoft.public.windowsxp.help_and_support)