Re: Is booting Windows CE 6.0 Unstable?

Hi Paul,

Thanks for the reply. I have sent our communication to VIA. I can't help
to wonder why the system boots up successfully sometimes?
--
Don


"Paul G. Tobey [eMVP]" wrote:

Well, the hub messages sound like USB, but you'd have to look through the
source for your BSP, I think, to find out what's causing the values to be
what they are. Maybe you have to choose on the board between USB and a
serial port via a processor register or something and you've got it set the
wrong way, given that you have USB bus support in the device?

Paul T.

"Don" <Don@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:DDD2BC38-8E7D-4ADD-A243-16AF5B1780A6@xxxxxxxxxxxxxxxx
Hi

The following is the debug info being printed out of the Minit-ITX M11 COM
Port when 6.0 hangs booting up. The following just gets sent over and
over.

------------------------------------------------------------------------------------------------
CRootHub::SetOrClearFeature - port = 5, set/clear = 0x1, feature = 0x8,
FAILED
CRootHub::SetOrClearFeature - port = 5, set/clear = 0x1, feature = 0x13,
FAILED
CHub(Root tier 0)::HubStatusChangeThread - port 5, change = 0x0008, status
=
0x0508
CHub(tier 0)::HubStatusChangeThread - addr 0 port 5 over current!
+CHub(Root tier 0)::DetachDevice - port = 5
CHub(Root tier 0)::DetachDevice - reading NULL device detached on port 5,
doing nothing.
-CHub(Root tier 0)::DetachDevice - port = 5

------------------------------------------------------------------------------------------------

What does this mean
Don


"Don" wrote:

Hi,

One more thing to add. I installed all the tools and updates on an XP
machine and I get the same effect. Sometimes it boots and sometimes it
hangs
--
Don


"Don" wrote:

Hi

I have just tried to upgrade to Windows CE 6.0. This experience has
not
been a smooth one. I have downloaded the 6.0 eval all the updates
except for
the January and Febuary one because they will not install on Windows
Vista
which I am tring to use as my development environment. I have also
installed
the 6.0 BSP from the Via embedded Web site since my target hardware is
a
Mini-ITX M11 motherboard. I have created a 6.0 image. The type is an
Internet appliance. I am booting this image from a compact flash.
Each one
on the 5 compact flashs that I have configured with 6.0 is sometimes
booting
up and sometimes hanging. This is a real show stopper for me. The
reason
for my upgrade to 6.0 has been the fact that 5.0 file sharing over
ethernet
is bugging and does not allow me to do what I need to and I have been
promised that this issues has been resolved with 6.0 in another post.
Can
anyone help? Is the sometimes booting thing a know issue? Does anyone
know
how I can debug this?
--
Don



.

Relevant Pages

  • Re: Is booting Windows CE 6.0 Unstable?
    ... Well, the hub messages sound like USB, but you'd have to look through the ... source for your BSP, I think, to find out what's causing the values to be ... the January and Febuary one because they will not install on Windows ... I am booting this image from a compact flash. ...
    (microsoft.public.windowsce.embedded)
  • Re: No longer boots - drvmain.sdb / IRQL_NOT_LESS_OR_EQUAL
    ... Booting from the XP disk and selecting recovery console or install gives me a ... i can't reinstall and i can't run recovery console. ... i use Windows Update to update my service packs, ... somehow install Windows on it and reinstall everything (not sure i can ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: New Mobo and Processor
    ... booting from the hard drive? ... I think the next screen | should be the screen that gives you the expected time for | the install etc and has the green flashing boxes in the ... |>Make sure you did the repair operation correctly. ... I restarted |>> and went to safe mode. ...
    (microsoft.public.windowsxp.hardware)
  • Re: Can Xp CD be installed from a 98 fllopy boot?
    ... >> from the command line is the absolutely LAST RESORT way to install ... The most desired way to install XP cleanly is by booting your ... >> b) A CD or DVD drive which allows you to use it as a boot device. ... If his old drive does not allow for booting the machine (some older drives ...
    (microsoft.public.windowsxp.general)
  • Re: INstall of XP fails with BSOD on partmgr.sys on disc 6
    ... I had already tried booting from the CD as well as ... I received the error message that this (setup) program can't be run from ... That is why I was trying to install from the 6 floppies which I had ... > BTW, when the floppy disks fail, it usually due to a bad floppy disk. ...
    (microsoft.public.windowsxp.setup_deployment)