Re: LCD Display in WinCE

Tech-Archive recommends: Speed Up your PC by fixing your registry

It is much a question of controller than peripherals itself : you should
identify which display & keypad controllers you have on your device, and
which peripherals they support.

For keypad, matrix keypads are standards, and depending on the nr of keys
you plan to have, you'll need a controller that is able to handle enough
row/col

For display, you should look at the data*** of your display controller to
identify the displays supported (TFT/STN, nr of LCD bits, resolutions, ...)

--
----------------------------------------------------------------
Yannick Chamming's (eMVP)
ADENEO
Windows Embedded Manager
ychammings AT adeneo DOT adetelgroup DOT com>
http://www.adeneo-embedded.com
Tél : +33 (0)4.72.18.08.40
Fax : +33 (0)4.72.18.08.41
----------------------------------------------------------------

"Amit Golhani" <AmitGolhani@xxxxxxxxxxxxxxxxxxxxxxxxx> a écrit dans le
message de news: B54A8722-6827-446E-9DA3-6D1ADD21FC64@xxxxxxxxxxxxxxxx
Hello All,

I am planning to use LCD display & keypad with WinCE for my product.

But exactly don't know how to interface LCD display & keypad with WinCE.

I need suggestions.

I also need the list of LCD display devices & keypad (of different make)
which

support WinCE.

Thanks in Advance.

Amit


.

Quantcast