Re: To Store Image in Hard Disk of My Stand alone PC

Does your image include the PCI bus controller? Are the registry settings
for your particular ATA controller in the registry?

For the USB: Did you add the appropriate USB host controller driver
typically the standard drivers UHCI/OHCI will work with PCI based systems
as-is.

You should check the debug output from the PCI bus support to see if it is
at least detecting the devices in question and just not finding registry
info to load the driver. If it's not finding the devices you have a more
fundamental problem.

--
Steve Maillet
EmbeddedFusion
www.EmbeddedFusion.com
smaillet at EmbeddedFusion dot com


.

Relevant Pages

  • (no subject)
    ... As Greg pointed out, topology rarely changes, ... add and remove USB hubs it becomes a bit of pain). ... the same problem - USB bus grows off PCI bus so adding ... new USB controller possibly invalidates all configuration. ...
    (Linux-Kernel)
  • Re: Fighting for the power.
    ... PCI bus provides method to control device power. ... completely no use for my FireWire controller and most of time - EHCI USB ... The new USB stack should turn off USB HC's automatically when not in use. ...
    (freebsd-current)
  • Re: simultaneous copy to multiple media
    ... > 2) if I understand it right, an USB controller is connected to ... > to the PCI bus and there can be many separate USB ... they are all connected to the same bus (the PCI bus). ...
    (comp.lang.python)
  • Re: Adding USB2.0 to older PC
    ... > In article, Boss Hog ... But it won't give you full USB 2.0 speed; the PCI bus just isn't ... But it should be faster than USB 1.1. ... controller). ...
    (uk.comp.homebuilt)
  • Re: dvdrw disappears
    ... The UDMA settings you have to chanche under the ide controller not the cd ... reinstall it and uninstall it the proper way. ... As to changing the Ultra DMA Mode, as I have mentioned it appears to be ... I will have a look in the registry at some stage. ...
    (microsoft.public.windowsupdate)