Re: BlueTooth support under CE 5.0

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

Hi Fernando,
Now I have problem to check PAN.
I got one Blekin Bluetooth Access Point (F8T030). My device can see it in
Bluetooth Manager, it can also be trusted. The problem is I can not get any
IP information for "BTPAN1".
Any hints for setup the PAN? Any proved working AP to test?

Regards,
John


""Fernando Gonzalez [MS]"" <fegonzal@xxxxxxxxxxxxxxxxxxxx> wrote in message
news:ytx1jTjdFHA.940@xxxxxxxxxxxxxxxxxxxxxxxx
> This document describes the bluetooth support in CE 5.0:
>
> http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcecomm5/ht
> ml/wce50conhands-freeprofile.asp
>
> Headset/Handsfree profiles are supported, but Audio Gateway role only. You
> can test the audio gateway against a headset, but there will be no audio
> unless you implement audio routing:
> http://msdn.microsoft.com/library/default.asp?url=/library/en-us/wcecomm5/ht
> ml/wce50conhands-freeprofile.asp
>
> Can you elaborate on the specific HID issue?
>
> ___________________________________________________________________________
> This posting is provided "AS IS" with no warranties, and confers no
> rights.
> ___________________________________________________________________________
> --------------------
>> From: "John Chen" <DT@xxxxxxxxxxxxxxxx>
>> Subject: BlueTooth support under CE 5.0
>> Date: Mon, 20 Jun 2005 01:23:35 -0700
>> Lines: 15
>> X-Priority: 3
>> X-MSMail-Priority: Normal
>> X-Newsreader: Microsoft Outlook Express 6.00.2900.2527
>> X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2900.2527
>> X-RFC2646: Format=Flowed; Original
>> Message-ID: <uUurcFXdFHA.2124@xxxxxxxxxxxxxxxxxxxx>
>> Newsgroups: microsoft.public.windowsce.embedded
>> NNTP-Posting-Host: adsl-69-236-90-14.dsl.pltn13.pacbell.net 69.236.90.14
>> Path: TK2MSFTNGXA01.phx.gbl!TK2MSFTNGP08.phx.gbl!TK2MSFTNGP14.phx.gbl
>> Xref: TK2MSFTNGXA01.phx.gbl microsoft.public.windowsce.embedded:5851
>> X-Tomcat-NG: microsoft.public.windowsce.embedded
>>
>> Hi All,
>> I have one device (x86) running CE 5.0. To test Bluetooth support I have
>> included as many BT profile as possible in that CE build. Now I have
>> question:
>> 1. How do I test bluetooth HID device? I can find it, but I can not
> active
>> it.
>> 2. How do I test the bluetooth headset?
>> 3. ....
>> Are there any document describe how BlueTooth device works under Windows
> CE
>> 5.0?
>>
>> Thanks,
>> John
>>
>>
>>
>


.

Relevant Pages

  • Re: BlueTooth support under CE 5.0
    ... Also, keep in mind that PAN is a layer2 bridging technology, so you don't ... > I got one Blekin Bluetooth Access Point. ... but Audio Gateway role only. ... How do I test the bluetooth headset? ...
    (microsoft.public.windowsce.embedded)
  • Re: No Bluetooth Icon in Control Panel
    ... I now have a Bluetooth Icon in my Control Panel, Bluetooth Support ... and I'm using the Microsoft Bluetooth stack in ... message that appears when you install a USB transceiver for a Microsoft ...
    (microsoft.public.windowsxp.general)
  • Bluetooth audio stuff
    ... Mobile phone with Class 2 bluetooth support ... Class 1 bluetooth USB dongle ... house using the headset over the long-range class 1 link. ...
    (Ubuntu)
  • Re: ipaq 1940 bt problem with win xp sp2
    ... When a Bluetooth device that is approved by the Windows Hardware Quality ... Labs the device is detected as present and Bluetooth support is ...
    (microsoft.public.pocketpc)
  • Re: ipaq 1940 bt problem with win xp sp2
    ... Bluetooth drivers and if it has a newer version, ... When Bluetooth support is enabled, you can find changes in the ... > manufacturer to support Service Pack 2. ...
    (microsoft.public.pocketpc)