RE: Network and DHCP failure with hive based registry on CE PC

Tech Tip: Click here to run a free scan for Windows Errors and optimize PC performance

From: wrx03ppp (yourdisplayname_at_discussions.microsoft.com)
Date: 03/04/05 

Date: Fri, 4 Mar 2005 09:43:01 -0800

Hi

Ok, after many laborious hours, putting the PCI bridge template registry
entries into the boot hive section seems to make this work:

; HIVE BOOT SECTION
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PCI\Template\PCI-PCI-BRIDGE]
"Class"=dword:06
"SubClass"=dword:04
"NoConfig"=dword:1
; END HIVE BOOT SECTION

But I'm not sure why, any explanations welcome.

Sean

"wrx03ppp" wrote:

> Hi
>
> Stuck again.... Any help appreciated as to why my VIA EPAME6000 network
> won't start when I enable the hive based registry. This is with KITL disabled
> - and I only realised that I had a problem when I read an earlier post.
>
> Clues might be that during boot with RAM based registry I get:
>
> 0x8dfcd800: DHCP:: $$$ NewDhcpInfo: 0x52bc0
> 0x8dfcd800: -RequestDHCPAddr: Context 2
>
> Whilst with Hive based registry I get:
>
> 0x8dddbbf0: DHCP:: $$$ NewDhcpInfo: 0x280970
> 0x8dddbbf0: -RequestWLan: Context 2
>
> And it's from this point on that differnces proliferate. I've tried
> including the network card driver in the boot hive to no effect.
>
> Any ideas, again, much appreciated.
>
> Thanks
>
> Sean

Relevant Pages

  • Re: Ad-Aware - OT?
    ... When you get to the list of "bad entries", don't ask for removal, just ... Delete the listed registry keys manually and exit. ... Open Ad-Aware and try to update it. ... If you can identify the applicationthat are running on boot that aren't ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: ntoskrnl.exe problem HELP
    ... option when you go to try to boot into safe mode, ... I hope I don't see anything like this ever again, messing with the registry ... access the installation as a simple data disk and use a suitable ... from the working Windows installation ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: ntoskrnl.exe problem HELP
    ... option when you go to try to boot into safe mode, but whenever I copied another boot.ini file to it, any additional options other than the different variations of "Safe" mode disappeared. ... I hope I don't see anything like this ever again, messing with the registry isn't one of those things I like to do, but in this particular case, I didn't really have any choice. ... 2- Mount the disk in another Windows NT type computer and use the "Load Hive" feature in Regedit or Regedt32. ... 3- Access the broken installation via a "Parallel" or proper "Dual Boot" installation on the same computer and use the "Load Hive" feature in Regedit or Regedt32. ...
    (microsoft.public.windowsxp.help_and_support)
  • Re: Ho to run CF driver before reading hive-based registry
    ... BOOT SECTION": ... so I had to rewrite the driver for it. ... The problem is now the hive-based registry. ... FileSystem Starting - starting with clean file system ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Final Report Vundo
    ... Since I have a dual boot capability, ... registry is more easily done from the XP partition. ... Vundo with a now deleted file (another thing that Shedrick explained in his ... ddayv.exe and ddayv.dll in the system32 directory, ...
    (microsoft.public.windowsxp.configuration_manage)