Re: Kernel debugger is waiting to connect with target

From: Erwin (sperwin_at_NO-SPAMquicknet.nl)
Date: 10/21/04 

Date: Thu, 21 Oct 2004 09:56:22 +0200

What does you serial debug output saying?

Er

"remcow" <whybcuz@yahoo.com> schreef in bericht
news:8bd95f81.0410190522.27a00029@posting.google.com...
> Hi Sujith
>
> I had something similar happen a while ago -- my bootloader polled the
> interrupt line, which worked fine. After download I'd get a couple of
> debug messages and the whole thing would stop.
>
> It ended up that something was wrong with the interrupts when it
> switched from polled to actually using interrupts. My problem was
> within a CPLD, but could have as easily been inside code.
>
> Hope that helps a little.
> Remco
>
>
> "Sujith" <sujithss@hotmail.com> wrote in message
> news:<#RPI2UatEHA.2516@TK2MSFTNGP11.phx.gbl>...
>> Hi,
>> I am able to download the NK.BIN to the target, but then the PB is
>> showing
>> Kernel debugger is waiting to connect with target and I am not getting
>> any
>> further debug messages in the debug window.
>>
>> my platform is ARM926. and my platform settings is ..
>> - Enable CE Target Control Support
>> - Enable Full Kernel Mode
>> - Enable Images Larger than 32 MB
>> - Enable KITL
>>
>> and I have 2 UARTs also.
>> UART 0 I use for downloading and
>> UART 1 use for debug.
>>
>> I have configured the KITL as UART0 with itz virtual address.
>>
>> but the PB give this message and it hangs there..
>>
>> what went wrong?
>> any help will be greatly appreciated.
>> Regards
>> Sujith

Relevant Pages

  • Re: Weird behavior in debuggin using XMD
    ... TestAppPeripheral.c which i download to the extern ... when it tests interrupts in dosent catch any interrupts, ... But anyway, i wanted to debug the program using the debugger, i ... Maybe the base system builder code is rubish? ...
    (comp.arch.fpga)
  • Weird behavior in debuggin using XMD
    ... I have implemented a base builder system for the Spartan3e starter kit ... TestAppPeripheral.c which i download to the extern ... when it tests interrupts in dosent catch any interrupts, ... But anyway, i wanted to debug the program using the debugger, i ...
    (comp.arch.fpga)
  • Re: Kernel debugger is waiting to connect with target
    ... debug messages and the whole thing would stop. ... It ended up that something was wrong with the interrupts when it ... > I am able to download the NK.BIN to the target, but then the PB is showing ... > UART 1 use for debug. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Kernel debugger is waiting to connect with target
    ... debug messages and the whole thing would stop. ... It ended up that something was wrong with the interrupts when it ... > I am able to download the NK.BIN to the target, but then the PB is showing ... > UART 1 use for debug. ...
    (microsoft.public.windowsce.embedded)
  • Re: Kernel debugger is waiting to connect with target
    ... > debug messages and the whole thing would stop. ... > switched from polled to actually using interrupts. ... >> I am able to download the NK.BIN to the target, ...
    (microsoft.public.windowsce.platbuilder)
Loading