Re: Have you got the error while conneting emulator??

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance

From: Ruben Jönsson (ruben_at_pp.sbbs.se)
Date: 03/01/04 

Date: Mon, 01 Mar 2004 09:18:22 +0100

Hi,

eVC++4, using MFC, PPC2003 emulator on a W2000 machine.

I also had the same problem and it turned out it was because I had removed one of the toolbars in the IDE. It was the
toolbar containing drowpdown combo boxex for the project, the active configuration and the active platform - I think
it's the build toolbar (I don't have the IDE here so I'm not quite sure about the names).

I could test the connection in the 'platform manager dialog' (again, not sure if this is the correct name) and here it
reported no errors.

I have just started out with pocket PC, windows CE and the embedded IDE myself, but I am pretty sure You have to use
service pack 2 for eVC++4.

Regards / Ruben

On Fri, 27 Feb 2004 13:45:01 +0100, "M.Eger" <stegraf@yahoo.com> wrote:

>I have the same problem, but if i am connected to the internet (TCP/IP is
>active) it works.
>
>"Jigar Mehta" <jbmehtain@yahoo.co.in> schrieb im Newsbeitrag
>news:ujfuexD0DHA.2412@TK2MSFTNGP10.phx.gbl...
>> Hye friends!!!
>> Jigar Mehta from India... Currently I have installed eVC++ 4.0 version
>> (without service pack 2) on windows XP machine. Now whenever I write any
>> program and try to compile it, it successfully compiles. Whenever I try to
>> run it, I am getting error saying, "Cannot connect to device" in
>messagebox
>> with error (red cross) symbol.
>>
>> My configuration is as follows.. I have selected Win32 Emulator in
>> project settings and the project is in the debug mode. So, this is what my
>> error is...
>>
>> Has anyone of you faced this kind of error?? If yes and if you have
>the
>> solution, please let me know, as I am trying to connect from last 4
>days...
>> I have tried installing the SW on windows 2000 machine and formatted my
>HDD
>> once for this. But in vain!! I can not get the solution.
>> Please help me in solving this.
>>
>> --
>> Jigar Mehta
>> jbmehtain@yahoo.co.in
>>
>>
>

Relevant Pages

  • Re: Cloning
    ... able to recognize the other IDE and was able to transfer data. ... I don't have to do any updating 2010 when the new windows OS will ... I have a 40 gig disk where my XP Pro is lying ... Windows does not have any inbuilt tools for cloning. ...
    (microsoft.public.windowsxp.general)
  • Re: IE launching when Firefox is default browser
    ... Well, as you know, the Links folder is just a standard subdirectory of the ... desktop toolbar that points direct to it. ... And, as with any folder, you can use Windows ... default browser chosen. ...
    (microsoft.public.windows.inetexplorer.ie6.browser)
  • Re: Top Toolbar disappeared
    ... Subject: Toolbar problem not fixed 10/10/2004 9:15 PM PST ... Ramesh, MS-MVP XP Shell/UI ... > Assuming your system is set to boot from the CD-ROM drive, ... > with the option to setup Windows or Repair Windows Installation ...
    (microsoft.public.windowsxp.basics)
  • Re: Help, help, help, more help, extra help, HELP! how to turn off IDE DMA...
    ... Windows CE at all, or Windows CE doesn't start, failing somewhere after it's ... What we've found is that with modern flash cards, CE doesn't boot. ... I want to do is turn IDE DMA off in the registry. ...
    (microsoft.public.windowsce.platbuilder)
  • Re: Momentary black screen when program launches
    ... lets say the compiler takes 5 seconds to compile my source. ... seconds is up then I can get back to the Windows desktop and I will see an ... spawned by another program (IDE, Explorer, etc.) ... The Help and Support newsgroup is *terribly* named, ...
    (microsoft.public.windowsxp.general)