Re: Error while compiling WINCE OS 6.0 with Emulator ARMV4I

Tech-Archive recommends: Speed Up your PC by fixing your registry

Dear Erwin

As you have mentioned below


Lets say I have made a OS Design called OSDesign1 with the emulator. My
Flatrelease directory would be:
<WINCEROOT>\OSDesigns\OSDesign1\OSDesign1\RelDir\DeviceEmulator_ARMV4I_Debug

So its like:
<WINCEROOT>\OSDesigns\OSDesign1\OSDesign1\RelDir\<BSPNAME>_<TGTCPU>_<CONFIGURATION>

Are you able to build a OSdesign based on the emulator which includes IE?

I try to build an os design with Device Emulator ARMV4I...But i am getting
the same error ..Missing Jsproxy.dll on flat release directory.


Are the jsproxy libs located in ?
<WINCEROOT>\PUBLIC\IE\OAK\LIB\<(_TGTCPU)>

Yes i have gone through the path and the lib files are there in the above
path for IE.

Any Idea

Regards,
Augustin.

"Augustin" wrote:

Dear Erwin,

I have send you the link to your ID ,for the WINCE 6.0 BSP whatever i am
using.

I have installed WINCE 5.0 & 6.0 on two different system. I am using 5.0 and
6.0 BSP to compile, that's the reason you are getting different BSP names.

I have re-installed WINCE 5.0 and now for the first time when i compiled
(Clean before building & Sysgen) i didn't get the previous error ( Quartz )
i only got some undeclared Variable errors . So i corrected the errors and i
recompiled
(Clean before building & Sysgen) now i am getting the previous error of
(Quartz) in directx

Starting sysgen phase for project ( directx )
Sysgening platform C:\WINCE500\platform\Adelaide_298
Sysgening platform C:\WINCE500\platform\Adelaide_298
\WINCE500\build.err


Wat to do? I have to re-install Windows XP to solve this problem. But why
the first time when i am compiling i didn't get the error . how to get rid
from this error.

Regards,
Augustin




"Erwin Zwart" <"erwin AT GuruCE DOT COM" wrote:


The jsproxy is a public component and is part, obviously, of the
internet explorer. It is only in binary form (*.lib) in the public tree.
During the sysgen fase it will create the dll.

If everything is oke, then it is not necessary to change the path names
for public components.

Are the jsproxy libs located in ?
<WINCEROOT>\PUBLIC\IE\OAK\LIB\<(_TGTCPU)>

What is the name of your OSDesign? Which CPU, BSP name + locations. And
where is the jsproxy.dll located?

I see different BSP names regarding your last post (BSP name =
adelaide_imx31) and the one before that (BSP =
G+F_iMX31_Jupiter_Series). But wait also the pathname is something
different.

Lets say I have made a OS Design called OSDesign1 with the emulator. My
Flatrelease directory would be:
<WINCEROOT>\OSDesigns\OSDesign1\OSDesign1\RelDir\DeviceEmulator_ARMV4I_Debug

So its like:
<WINCEROOT>\OSDesigns\OSDesign1\OSDesign1\RelDir\<BSPNAME>_<TGTCPU>_<CONFIGURATION>

Are you able to build a OSdesign based on the emulator which includes IE?

I would be happy to try building your BSP/OSDesign. If so maybe it is
better to take this off line. Email directly to Erwin AT GuruCE DOT COM.

Good luck,

Erwin Zwart,
Check out my blog: http://GuruCE.com/blog

GuruCE
Microsoft Embedded Partner
http://GuruCE.com
Consultancy, training and development services.

Augustin schreef:
Dear Erwin,

I have installed only CE 6.0 in a different system.

As you told me not to change anything on public tree . Now i will not change
the the file location of jsproxy.dll in i.e.bib

I have searched in WINCE 600 Tree for jsproxy.dll ,i found in build.dat file

E:\WINCE600\PLATFORM\adelaide_imx31\Build.dat(75):
F|jsproxy.dll|80000|0|1BD7CE96AF66A00
E:\WINCE600\PLATFORM\COMMON\Build.dat(58):
F|jsproxy.dll|80000|0|1BD7CE96AF66A00

I don't understand the above once i went through Build.dat file.

My jsproxy.dll location is not in flat release directory . Its a different
location. How to make these location change happen.

Help me

Regards,
Augustin.



"Erwin Zwart" <"erwin AT GuruCE DOT COM" wrote:

Is this CE 6.0 installed on the same machine where you just re-installed
CE 5.0? Then you'll have to reinstall CE 6.0 also (if that is the case).
search in the PB newsgroup for side by side installation of CE 5.0 and 6.0.

Never ever change something in the PUBLIC tree (ie.bib). This was also
mentioned in the blog item(s) I send you. ce.bib is a generated file and
contains all configuration files merged, thus modifying ce.bib help.
If you want to change/add entries in configuration files
(bib/reg/dat/db) use project/platform specific configuration files
located in your BSP or projects (project.bib or platform.bib). Your
changes has to end up in the ce.bib (for bib files) after the makeimage
fase.

If you do a search for jsproxy.* in your CE 6.0 tree, do you find any
files? You'd said you changed the location in the bib file? does it mean
that jsproxy.dll is located somewhere else then your _FLATRELEASEDIR?
sensing "build and sysgen" because i think jsproxy cannot be rebuild.

I am not quite sure (never tried) how PB handles special symbols in path
names (+).I know for sure that it cannot handle spaces.


Good luck,

Erwin Zwart,
Check out my blog: http://GuruCE.com/blog

GuruCE
Microsoft Embedded Partner
http://GuruCE.com
Consultancy, training and development services.

Augustin schreef:
Dear Erwin,

Right now i am compiling an OS design in WINCE 6.0

I got a error: could not find file
jsproxy.dll
H:\osdesign\Adelaide\RelDir\G+F_iMX31_Jupiter_Series_Retail\jsproxy.dll NK SHC

once i went through ce.bib i found the following

; @CESYSGEN IF IE_MODULES_WININET
; Communications components
wininet.dll
H:\osdesign\Adelaide\RelDir\G+F_iMX31_Jupiter_Series_Retail\wininet.dll
NK SHC
jsproxy.dll
H:\osdesign\Adelaide\RelDir\G+F_iMX31_Jupiter_Series_Retail\jsproxy.dll
NK SHC
; @CESYSGEN ENDIF IE_MODULES_WININET

i have changed the jsproxy.dll file location in "ie.bib".

but still it is showing the same error "missing dll"? Now how can i edit a
ce.bib file to locate the dll file location. Or is there any other solution.
please provide your support

Regards,
Augustin.

"Erwin Zwart" <"erwin AT GuruCE DOT COM" wrote:

NMD feature pack is an add-on for Windows CE 5.0 which updates the
platform builder catalog, with catalog components. My thought was if
you had installed this NMD pack, you'd probably also need the
(available) service pack for this. But i don't think it is relevant for
your problem.

QFE (Quick fix engineering) are updates for the windows ce operating and
contain updated binaries and sometimes, but not always, updated source
code. For every QFE they include a read me which tells you exaclty what
will change/update when you install the QFE. You don't need to do some
extra steps after installing the QFE's other then performing a "Sysgen"
with the "clean before building" flag.

For installing the QFE there is a very nice tool which install all QFE's
without clicking yourself into RSI:
http://guruce.com/blogpost/downloadqfes

//What to build when:
http://guruce.com/blogpost/whattobuildwhen

Good luck,

Erwin Zwart,
Check out my blog: http://GuruCE.com/blog

GuruCE
Microsoft Embedded Partner
http://GuruCE.com
Consultancy, training and development services.

Augustin schreef:
Hi Erwin,

Thanks for your reply.

I have gone through the link provided by you. i got the exact same errors.

Any how now i am reinstalling platform builder.

One more doubt,Installing all the QFE will affect the platfrom builder?.
After installing QFEs anything has to be done before we build an OS.

Can you tell me what for this you have mentioned ->Perhaps NMD feature pack
SP?

Once again thanks for your support. I will get back to you once i install PB.

Regards,
Augustin

"Erwin Zwart" <"erwin AT GuruCE DOT COM" wrote:

hmm interesting,

Did you install all QFE's? Perhaps NMD feature pack SP (wild guess).

Are you sure that you don't see any build log file in the public tree (
sorry for nagging on this)? I only saw this behavior on systems where
they did a clean "build and sysgen".

And this post is probably going to make you miserable:
http://groups.google.nl/group/microsoft.public.windowsce.platbuilder/browse_thread/thread/118e45355eabaee2/edf9ad1a2a47122e?hl=nl&lnk=st&q=PacketSendTS#edf9ad1a2a47122e

Good luck,

Erwin Zwart,
Check out my blog: http://GuruCE.com/blog

GuruCE
Microsoft Embedded Partner
http://GuruCE.com
Consultancy, training and development services.

Augustin schreef:
Hi Erwin,

I have only Enabled Clean before building and i gave SYSGEN to compile the OS.

As you have mentioned i have never used Build and Sysgen. So whats the
problem could be on this system.

Regards,
S.Augustin Baskar.



"Erwin Zwart" <"erwin AT GuruCE DOT COM" wrote:

Hi,


It sounds to me that you did a "build and sysgen" with the "Clean before
building" enable flag, is that correct?

If thats the case, then you can reinstall platform builder, and then the
first thing you should do is remove that option from the build menu.

http://www.guruce.com/blogpost/whattobuildwhen

btw: you probably have more success with this question in the platform
builder newsgroup (microsoft.public.windowsce.platbuilder).

Good luck,

Erwin Zwart,
Check out my blog: http://GuruCE.com/blog

GuruCE
Microsoft Embedded Partner
http://GuruCE.com
Consultancy, training and development services.

Augustin schreef:
I am getting a error : SYSGEN0000: error(s) in sysgen phase

I went through build.log file and i found the following errors:

C:\WINCE500\Pbworkspaces\Adelaide_298_pbworkspace\WINCE500\Adelaide_298_ARMV4I\cesysgen\oak\lib\ARMV4I\retail\quartz.exp
wmt_httpstrm.lib(httpstrm.obj) : error LNK2019: unresolved external symbol
"protected: long __cdecl CMediaStreamBase::PacketSendTS(unsigned char
*,unsigned long *,unsigned long *)"
(?PacketSendTS@CMediaStreamBase@@IAAJPAEPAK1@Z) referenced in function
"public: virtual long __cdecl CHttpStream::GetNextPktTS(unsigned long *)"
(?GetNextPktTS@CHttpStream@@UAAJPAK@Z)
wmt_httpstrm.lib(httpstrm.obj) : error LNK2019: unresolved external symbol
"public: long __cdecl CMediaStreamBuffer::SetDuration(unsigned long)"
(?SetDuration@CMediaStreamBuffer@@QAAJK@Z) referenced in function "private:
long __cdecl CHttpStream::ProcessReceivedDatagram(class CMediaStreamBuffer
*)" (?ProcessReceivedDatagram@CHttpStream@@AAAJPAVCMediaStreamBuffer@@@Z)
C:\WINCE500\Pbworkspaces\Adelaide_298_pbworkspace\WINCE500\Adelaide_298_ARMV4I\cesysgen\oak\target\ARMV4I\retail\quartz.dll
: fatal error LNK1120: 2 unresolved externals
NMAKE : fatal error U1077: 'link' : return code '0x460'
Stop.
.

Relevant Pages

  • Re: Error while compiling WINCE OS 5.0
    ... Try to build a OSDesign with the emulator and see if that works. ... Include IE and directx your OSDesign. ... Sysgening platform C:\WINCE500\platform\Adelaide_298 ... For every QFE they include a read me which tells you exaclty what will change/update when you install the QFE. ...
    (microsoft.public.windowsce.app.development)
  • Re: Error while compiling WINCE OS 6.0 with Emulator ARMV4I
    ... Augustin schreef: ... I have send you the link to your ID,for the WINCE 6.0 BSP whatever i am using. ... Sysgening platform C:\WINCE500\platform\Adelaide_298 ... For every QFE they include a read me which tells you exaclty what will change/update when you install the QFE. ...
    (microsoft.public.windowsce.app.development)
  • Re: Error while compiling WINCE OS 5.0
    ... BSP to compile, that's the reason you are getting different BSP names. ... Sysgening platform C:\WINCE500\platform\Adelaide_298 ... For installing the QFE there is a very nice tool which install all QFE's ... I have only Enabled Clean before building and i gave SYSGEN to compile the OS. ...
    (microsoft.public.windowsce.app.development)
  • Uninstall an Update
    ... After that install I am ... While SYSGENing of DCOM I get linker ... : fatal error LNK1120: 3 unresolved externals ...
    (microsoft.public.windowsce.platbuilder)