Re: Activesync problem connecting to CEPC downloaded image
- From: "Paul G. Tobey [eMVP]" <ptobey no spam AT no instrument no spam DOT com>
- Date: Tue, 22 Nov 2005 11:09:06 -0700
The easiest way is to verify that your board support package sends the debug
messages somewhere else or nowhere at all.
Did you go through the steps of setting up a connectoid for the AS
connection? I just get the feeling that you haven't followed the required
steps. I've covered setting this up for serial connection before. At a
guess, it was probably in microsoft.public.windowsce.platbuilder. You can
search using GoogleGroups (you might search microsoft.public.windowsce.* to
cover all the groups I normally read).
Paul T.
"Roberto" <Roberto@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
news:86A12130-667D-4FC0-B830-75B2C7FA8E20@xxxxxxxxxxxxxxxx
>I have tried to download an image into emulator and connect to it, and
> everything works perfectly (with activesync 4.1). But the problem persist
> onto cepc image.
> The com port is used only by activesync. What about serial debug? Haw can
> i
> verify that no debug message are sent to that port?
>
> "Paul G. Tobey [eMVP]" wrote:
>
>> I'm not sure what's wrong, but you should make sure that all of the
>> ActiveSync components are included in your OS, verify that no other
>> process
>> besides repllog.exe is trying to use the serial port (make sure, for
>> example, that you aren't trying to send serial debug output to that
>> port),
>> and use AS 3.8.
>>
>> Paul T.
>>
>> "Roberto" <Roberto@xxxxxxxxxxxxxxxxxxxxxxxxx> wrote in message
>> news:6B3D0DA5-D340-47FC-B377-8C85CB29F84F@xxxxxxxxxxxxxxxx
>> >I want to add something...
>> > I have tried with ActiveSync 3.8, 4.0 and 4.1
>> > The same thing for all three.
>> >
>> > Any suggestion?
>> >
>> > "Roberto" wrote:
>> >
>> >> Hi everybody, i'm new!!
>> >> I'm doing some experiments on Platform Builder 5 (the first time).
>> >> I have done a custom image for CEPC, downloaded onto a pc with
>> >> network. I
>> >> put the image onto HD and now it boots from the hard drive. Then i
>> >> tried
>> >> to
>> >> connect to my pc with activesync (serial cable). The connection seems
>> >> to
>> >> be
>> >> done (it's green on my desktop and in the CEPC it is connected), but
>> >> if i
>> >> try
>> >> to Explore the files, i cannot see anything. Even trying a "remote
>> >> connection" from Platform Builder -> Tools. Can someone explain it to
>> >> me?
>> >> What's wrong?
>> >> Thanks all and sorry for my english! :-)
>>
>>
>>
.
- Follow-Ups:
- References:
- Re: Activesync problem connecting to CEPC downloaded image
- From: Paul G. Tobey [eMVP]
- Re: Activesync problem connecting to CEPC downloaded image
- Prev by Date: Re: problem loading block device driver
- Next by Date: Re: problem loading block device driver
- Previous by thread: Re: Activesync problem connecting to CEPC downloaded image
- Next by thread: Re: Activesync problem connecting to CEPC downloaded image
- Index(es):
Relevant Pages
|
