Re: How Long Should an Update Take? -- Windows XP

Tech-Archive recommends: Repair Windows Errors & Optimize Windows Performance



"MowGreen [MVP]" wrote:

Disconnect the system from any network/net connection.
If there is no way to shut the system down, then hold the power button
in for at least 10 seconds and it will shut down.
Restart the system.

Now go to Start > Run > type in

net stop wuauserv
Click OK or press Enter
This will halt the updating process

* Completely and totally* disable the installed antivirus.
Consult the Help file of said installed AV to learn how this is done.
Go back to Start > Run > type in

net start wuauserv
Click OK or press Enter.
IF it installs, then restart the system.

REENABLE the installed AV *prior* to reconnecting the system.
If the update does not install, then please post the KB number of it.

MowGreen [MVP 2003-2007]
===============
*-343-* FDNY
Never Forgotten
===============



jamesmcnee wrote:

I have a secondary computer running Windows XP. I don't pay much
attention to it. It sits in our kitchen and my son plays a few
games ...

When I went to bed last night there was a blue screen with the Windows
XP logo and a message "Installing Update 1 of 1" then it would switch
to "Do not turn off or unplug the computer it will turn off
automatically."

So I left the machine alone. This morning I came down to find the
computer still running and the same messages.

If this situation sounds right how long should I wait before I really
worry?

If this situation sounds wrong what should I do?

I can't recall what version of XP we have or the details of the CPU
(and I can't check beacuse it is running the damn update) -- it is a
Sony Vaio desktop and is four or five years old. It doesn't have a
tonne of RAM and accesses the internet by wireless. We have anti-
virus and anti-spam that updates every boot up.

I would have told XP to do the automatic update thing but with the
machine used infrequently at strange times maybe it missed some.

Any advice would be much appreciated.

Thanks


Follow the advice given in the previous post. In addition, connect your pc
to the router/modem via a wired connection if at all possible as this is
generally more reliable than wireless. When you were able to use the computer
normally, did you notice any interference in your internet connection when
your fridge turned on and off or when your neighbour used their remote to
lock and unlock their car? If so, you may need to use a different power
circuit to that used by your fridge and/or you might need to select a
different channel.
.

Relevant Pages

  • Re: How Long Should an Update Take? -- Windows XP
    ... If there is no way to shut the system down, then hold the power button ... IF it installs, then restart the system. ... to the router/modem via a wired connection if at all possible as this is ...
    (microsoft.public.windowsupdate)
  • Re: how do you install multiple updates with a single restart?
    ... In article, Gary Gorbet ... Just a guess, but what if you select all the updates in the finder, and ... I've accomplished what I'd hoped: multiple installs with a single ... normally each require a restart, make sure they all get started before ...
    (comp.sys.mac.system)
  • How to debug network lockups and test /etc/network/interfaces config?
    ... etch installs" it locks up when I restart the networking, ... I had to setup a new etch install at a remote location with no DHCP server. ... course the installer prompted me to manually provide the network config info. ... On new thing I noticed as being different from sarge installs (with manual ...
    (Debian-User)
  • Re: Cannot dcpromo server, DNS error
    ... >> the installs ran fine neither program will run, ... > restart use the cd command. ...
    (microsoft.public.windows.server.dns)
  • Re: Booting The Right Way Only Takes a Little More and Solves My Terror
    ... Go to the back of the PC and either pull the plug or turn the PC Power Supply OFF. ... I did some installs that did not work and caused the PC to never get to the Windows logo. ... This after many attempts to simply Restart. ...
    (microsoft.public.windows.vista.general)